Table of Contents
Advertisement
1
Using the Probes
Supplied Accessories
Attaching Probe Accessories
8
The probes come with the accessories shown in
and listed in
Table 2
replacement accessories available in the replacement accessory
kit.
It's easy to change the probe tip and ground accessories.
shows locations for inserting the tip and the ground accessory. To
change an accessory, gently pull it straight out of its contact
socket along the axis of the probe. Once the accessory is removed,
insert the new accessory until it is seated in the contact socket. In
order to insert the probe tip completely into the housing, carefully
press the probe tip against a hard surface.
Figure 1
Tip and Grounding Connections
on page 9.
Table 3
on page 10 shows the
Figure 2
on page 9
Figure 1
N2795/6A User's Guide
Advertisement
Table of Contents
