6 Electrical Connection
6.1.2
Interior View
Figure 7: Connection areas in the interior of the inverter
Position
A
B
C
D
E
F
G
6.2
AC Connection
6.2.1
Requirements for the AC Connection
AC cable requirements as follows:
☐ Conductor type: copper wire
☐ External diameter: 14 mm to 25 mm
☐ Conductor cross-section: 6 mm² to 16 mm²
☐ Maximum conductor cross-section with bootlace ferrule: 10 mm²
26
STP15-25TL-30-BE-en-17
Designation
DC protective cover
Pin connector for connecting the multifunction relay or the SMA Power Control
Module
Pin connector for connecting the communication interface
Connecting terminal plate for connecting the AC cable
Screw to release and attach the communication board
Rotary switch A and B for setting the country data set
Slot for the SD memory card (for service purposes)
SMA Solar Technology AG
Operating manual