Advertisement
Additional 2 Way LCD Transmitter Functions
Display Illumination
Press and hold the
Melody / Vibration Mode
To have the remote control vibrate, play a melody tone or both each time it receives a
response from the vehicle press and release
seconds.
Button Beeps
To toggle button beeps on or off press and release
seconds.
Battery Save Mode
While in POWER SAVE MODE the 2-way LCD transmitter will NOT look for any
incoming signals from the main unit until a button is pressed. The LCD screen will
display SAVE to indicate that power save mode is ON. To enter power save mode
press and hold
Button Lock
Press and release
on or off. When the button lock is active, the remote control will beep/vibrate 2 times
when a button is pressed indicating it is locked.
Illumination
Press and release
illumination on or off. When on, the display will illuminate when it receives or sends a
command.
2 Car Mode
To control a second security system enter 2 car mode by pressing
and
together for 3 seconds. When the
screen it will control the second security system. Use the same method to exit 2 car
mode and resume control of the original vehicle's security system.
NOTE: A second security system must be installed and the LCD transmitter must be
learned to it before this feature will operate the additional system.
CA2RELCD5 / AS9234E 4280857 Owners rev A.
button for 1 second. The display will illuminate for 5 seconds.
for 5 seconds.
then press hold the
2 times then press and hold
then press and hold
then press and hold
for 2 seconds to toggle the button lock
for 2 seconds to toggle
icon appears on the transmitter's LCD
for 2
for 2
then press
9
Advertisement
