2 Way Remote Control Notifications; Transmitter Programming - Code Alarm Professional Series Owner's Manual

Hide thumbs Also See for Professional Series:

2 Way Remote Control Notifications

FUNCTION

Activation

Confirm Remote Start

Remote Start Running

Remote Start Shutdown

Low Battery

Turn the ignition ON.

Press and hold the valet/override button located on the antenna.

Within 10 seconds the LED's will begin to flash.

Press 1 button of each transmitter you wish to program, the LED's will

flash to confirm each transmitter.

Turn the ignition OFF

NOTE: This system has 1 button programming which programs all channels of the

system.

NOTE: The system will hold up to 4 transmitters in memory, programming a 5th

transmitter will erase the oldest transmitter in memory.

BEEPS / LED FLASHES

1 Beep / Flash

4 Beeps / Flashes (repeats 3 times)

1 Flash per 3 seconds for duration run time

3 Long Beep / Long Flashes (repeats 3 times)

2 Beeps / Flashes when button is pressed

Table of Contents

Ca1btw5