2 Way Transmitter Notifications; Transmitter Programming - Code Alarm CA2LED5 Owner's Manual

2 Way Transmitter Notifications

FUNCTION
Lock
Unlock
Trunk Release
Remote Start Activation
Confirm Remote Start
Remote Start Running
Remote Start Shutdown
Car Find / Panic
Low Battery

Transmitter Programming

1. Turn the ignition ON.
2. Press and hold the valet/override button located on the antenna.
3. Within 10 seconds the LED's will begin to flash.
4. Press 1 button of each transmitter you wish to program, the LED's will
flash to confirm each transmitter.
5. Turn the ignition OFF
NOTE: This system has 1 button programming which programs all channels of the
system.
NOTE: The system will hold up to 4 transmitters in memory, programming a 5th
transmitter will erase the oldest transmitter in memory.
CA2LED5 / AS9234E 4280852 Owners rev A.
BEEPS / LED FLASHES
2 Beeps / Flashes
1 Beep / Flash
1 Beep / Flash if vehicle is currently locked.
1 Beep / Flash
4 Beeps / Flashes
1 Flash per 5 seconds for duration run time
3 Long Beep / Long Flashes
1 Beep / Flash
2 Flashes when button is pressed
9