Using Your Remote Control - Code Alarm CA2RELCD5 Owner's Manual

Using Your Remote Control

Door Lock
To lock the vehicle doors press and release the
Door Unlock
To unlock the vehicle doors press and release the
Activating the Trunk Release Feature (Optional)
If this feature is enabled on your system, pressing and holding the
seconds will open the vehicle's trunk or hatch.
Remote Starting Your Vehicle
To activate the remote vehicle start function, press and release the
within 2 seconds. The vehicle will start and run the predetermined time set up during
installation (5 to 60 minutes selectable).
Entering the Vehicle During Remote Start
Enter the vehicle, insert your key and turn it to the run, NOT START, position, then
step on the brake, the vehicle is now in control of the ignition key.
NOTE: For push to start vehicle systems, simply enter the vehicle
with your key in hand, and step on the brake.
Using the "Quick-stop" Feature
With vehicle running, if you wish to make a quick stop and leave the vehicle running,
once you arrive at your destination:
a) place the gear selector in Park,
b) set the parking brake,
c) with your foot off the brake, press the transmitter button two times
in succession.
The vehicle will now be under control of the remote start system. Turn your
ignition switch off, WITHOUT, stepping on the brake, and exit the vehicle. Lock
the doors with the key to insure security.
CA2RELCD5 / AS9234E 4280857 Owners rev A.
button.
button.
button for 3
button 2 times
3