Transmitter Programming
1.
Turn the ignition ON.
2.
Press and hold the valet/override button located on the antenna.
3.
Within 10 seconds the LED's will begin to flash.
4.
Press 1 button of each transmitter you wish to program, the LED's will
flash to confirm each transmitter.
5.
Turn the ignition OFF
NOTE: This system has 1 button programming which programs all channels of the
system.
NOTE: The system will hold up to 4 transmitters in memory, programming a 5th
transmitter will erase the oldest transmitter in memory.
12
2017 Voxx Electronics Corporation. All rights reserved.