Care And Cleaning - Electrolux TWSL4E303 User Manual

9.2 Adjustment of default
dryness level
To change the default dryness level:
1. Turn the appliance on.
2. Wait approximately 8 seconds.
3. Select 1 of the available
programmes.
4. Touch and hold down the
Silent (Extra Leise) and
(Auffrischen) buttons at the same
time.
One of the symbols appears on the
display:
- Maximum dryness
- Extra dryness
- Standard dryness
5. Touch the
repeatedly until you reach the
desired dryness level.
Dryness
level
Maximum
dryness
Extra dry‐
ness
Standard
dryness
6. To memorise the setting touch and
hold down the

10. CARE AND CLEANING

10.1 Cleaning the filter
At the end of each cycle the
(Sieb) symbol comes on the display and
you must clean the filter.
The filter collects the lint
during the drying cycle.
Extra
Refresh
Start/Pause button
Display symbol
Extra Silent (Extra
filter
Leise) and Refresh
(Auffrischen) buttons at the same
time for approximately 2 seconds.
9.3 Deactivating the tank
indicator
The water container indicator is activated
by default. It illuminates at the end of the
drying cycle or during the cycle if the
water reservoir is full. If the draining kit is
installed the water container is drained
automatically and the indicator can be
deactivated.
To deactivate the indicator:
1. Turn the appliance on.
2. Wait approximately 8 seconds.
3. Select 1 of the available
programmes.
4. Touch and hold down
(Auffrischen) and
(Zeitwahl) buttons at the same time.
One of 2 configurations is possible:
• the tank (Behälter) indicator:
on if the symbol
- the water container indicator is
permanently activated
• the tank (Behälter) indicator:
off if the symbol
- the water container indicator is
permanently deactivated
To achieve the best drying
performances clean the filter
regularly , clogged filter lead
to longer cycles and energy
consumption increase.
Use your hand to clean the
filter , and if necessary , a
vacuum cleaner .
ENGLISH 19
Refresh
Time Dry
is
appears
is
appears