Media Settings - Vivotek PZ7112 User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Media Settings

In Media Settings column, click Add Media on Event Settings page to open the media settings page�
In this page, you can specify what kind of media to send when a trigger is activated� A total of 5 media
settings can be configured.
Media name: Enter a descriptive name for the media setting�
Media Type
There are three choices of media types available: Snapshot, Video Clip, and System log� Select the item
to display the detailed configurations. You can configure either one or all of them.
Snapshot: Select to send snapshots when a trigger is activated�
■ Source: Select to take snapshots from stream 1 or stream 2.
■ Send pre-event images
The Network Camera has a buffer area; it temporarily holds data up to a certain limit� Enter a number
to decide how many images to be captured before a trigger is activated� Up to seven images can be
generated�
■ Send post-event images
Enter a number to decide how many images to be captured after a trigger is activated� Up to seven
images can be generated�
For example, if both the Send pre-event images and Send post-event images are set to seven, a total
of fifteen images are generated after a trigger is activated.
■ File Name Prefix
Enter the text that will be put in front of the file name.
■ Add date and time suffix to the file name
Select this option to add date and time to the file name suffix.
For example:
Snapshot_20080104_100341
File name prefix
68 - User's Manual
1 pic. 2 pic. 3 pic. 4 pic. 5 pic. 6 pic. 7 pic.
The moment the trigger
is activated.
Date and time suffix
The format is: YYYYMMDD_HHMMSS
8 pic. 9 pic. 10 pic. 11 pic. 10 pic. 12 pic. 13 pic. 14 pic. 15 pic.