Vivotek PZ7112 User Manual page 114

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
PARAMETER VALUE
addpos <Text string less than
40 characters>
channel <0~(n-1)>
delpos <Text string less than
40 characters>
return <return page>
IP filtering
Note: This request requires administrator access privilege
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/ipfilter.cgi?
method=<value>&[start=<ipaddress>&end=<ipaddress>][&index=<value>]
[&return=<return page>]
PARAMETER VALUE
Method addallow
adddeny
deleteallow
deletedeny
start <ip address>
114 - User's Manual
DESCRIPTION
Add one preset location to preset list.
channel of video source
Delete preset location from preset list.
Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or relative
path according to the current path. If you omit this parameter, it
will redirect to an empty page.
DESCRIPTION
Add a set of allow IP address range to server. Start and end parameters must
be specified. If the index parameter is specified, it will try to add starting from
index position.
Add a set of deny IP address range to server. Start and end parameters must
be specified. If the index parameter is specified, it will try to add starting from
index position.
Remove a set of allow IP address range from server. If start and end
parameters are specified, it will try to remove the matched IP address. If index
is specified, it will try to remove the address from given index position. [start,
end] parameters have higher priority then the [index] parameter.
Remove a set of deny IP address range from server. If start and end
parameters are specified, it will try to remove the matched IP address. If index
is specified, it will try to remove the address from given index position. [start,
end] parameters have higher priority then the [index] parameter.
The start IP address to add or to delete.