Vivotek PZ7112 User Manual page 101

audioout_codec
uart_httptunnel
transmission_mode
network_wire
network_wireless
wireless_802dot11b
wireless_802dot11g
wireless_encrypt_wep
wireless_encrypt_wpa
wireless_encrypt_wpa2
derivative_brand
Group: event_i<0~2>
PARAMETER
name
enable
priority
delay
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
types
separaters by
comma)
<a list of the 0/7
available codec
types
separaters by
comma)
<boolean> 0/7
Tx, 0/7
Rx,
Both
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
VALUE SECURITY
(get/set)
string[40] 6/6
0, 1 6/6
0, 1, 2 6/6
1~999 6/6
available codec list
Indicate whether to support the http tunnel for
uart transfer
Indicate what kind of transmission mode the
machine used. TX: server, Rx: receiver box,
Both: DVR?.
Indicate whether to support the Ethernet
Indicate whether to support the wireless
Indicate whether to support the wireless
802.11b+
Indicate whether to support the wireless
802.11g
Indicate whether to support the wireless WEP
Indicate whether to support the wireless WPA
Indicate whether to support the wireless WPA2
Indicate whether to support upgrade function
for the derivative brand. For example, if the
value is true, the VVTK product can be upgraded
to VVXX. (TCVV<->TCXX is excepted)
DESCRIPTION
The identification of this entry
To enable or disable this event.
Indicate the priority of this event.
"0" indicates low priority.
"1" indicates normal priority.
"2" indicates high priority.
Delay seconds before detect next event.
User's Manual - 101