Technibel MPAF180R5I Operating Instructions Manual page 9

Temperature setting buttons
(TEMP.)
QUIET button
MODE selector button
(AUTO)
(HEAT)
(DRY)
(COOL)
(FAN)
FAN SPEED selector button
NIGHT SETBACK button
FLAP button
NOTE
HIGH POWER button
ON TIME/OFF TIME setting
buttons
Remote Control Unit (continued)
Press the button to increase the set temperature.
Press the button to reduce the set temperature.
The temperature setting changes by 1 °C or 2 °F each time one of the TEMP.
buttons is pressed.
: When you press this button, the fan rotates slower than the fan
speed setting to provide a quieter operating sound.
Use this button to select AUTO, HEAT, DRY, COOL or FAN mode.
: When this setting is selected, the air conditioner calculates the
difference between the thermostat setting and the room temperature
and automatically switches to the ''COOL'' or ''HEAT'' mode as
appropriate except at "M" of the Single/Multiple switch.
: The air conditioner makes the room warmer.
: The air conditioner reduces the humidity in the room.
: The air conditioner makes the room cooler.
: The air conditioner works only as a circulation fan except at "M" of the
Single/Multiple switch.
: The air conditioner automatically decides the fan speeds.
: High fan speed
: Medium fan speed
: Low fan speed
For details, see "5. Night Setback Mode". When you press this button in the
HEAT, DRY or COOL mode, the
remote control unit will automatically adjust the set temperature to save
energy.
Press this button either to select the setting of the airflow direction to the
auto. flap in each mode or one of the six possible positions manually or to
select the sweep function which moves the flap up and down automatically.
: Auto flap setting: If selected in a heating operation, the flap is set to
position (3) in the following chart. If selected in a cooling or dry
operation, the flap is set at position (7) in the following chart.
: The airflow direction can be set manually. (six positions)
: The flap moves up and down automatically.
When you press the FLAP button, the air flow direction will be changed one
by one as follows.
: If this button is pressed during HEAT, DRY, COOL or FAN operation,
the unit operates at maximum output for 30 minutes, regardless of the
desired temperature.
The fan speed is 1step above ''HIGH''.
No display: The timer does not operate.
: The air conditioner starts at the set time.
: The air conditioner stops at the set time.
: The air conditioner stops and starts, or starts and stops, at
the set times every day. For details, see "Setting the Timer".
mark appears in the display, and the
SWEEP
9