Technibel MPAF180R5I Operating Instructions Manual page 23

Anti-Mold Filter
How to remove the anti-mold
filter
Cleaning
How to replace the anti-mold
filter
Care and Cleaning (continued)
The anti-mold filter behind the air intake grille should be checked and cleaned
at least once every two weeks.
1. Open the front panel until it's
nearly horizontal, grasp the sections
near the front panel arms on both sides,
and then pull forward to remove the front panel
2. Remove the anti-mold filter.
Use a vacuum cleaner to remove light dust. If there is sticky dust on the filter,
wash the filter in lukewarm, soapy water, rinse it in clean water, and dry it.
1. Insert the top of the
anti-mold filter,
align the two protrusions
with the center hook at bottom,
then mount the filter
into place.
2. Press the locations marked
by the arrows
and close the front
panel.
ir clean filter
Front panel
nti-mold filter
nti-mold
filter
Center Hook
Protrusion
Front panel
23