Technibel MPAF180R5I Operating Instructions Manual page 8

Transmitter
Display
LED CLEAN
QUIET button
FAN SPEED selector button
FLAP button
ON TIME
Advance button
setting
Return button
buttons
CANCEL button
SENSOR button
ADDRESS switch
NOTE
Transmitter
Sensor
Display
LED CLEAN
ON/OFF operation button
1 HR. TIMER button
(1-HOUR OFF TIMER)
8
Remote Control Unit
LED
CLE N
Temperature display
selector button
The illustration above pictures the remote control unit after the cover has
been opened.
When you press the buttons on the remote control unit, the
in the display to transmit the setting changes to the receiver in the air
conditioner.
A temperature sensor inside the remote control unit senses the room
temperature.
Information on the operating conditions is displayed while the remote control
unit is switched on. If the unit is turned off, FLAP setting and FAN SPEED
setting are not displayed.
If this button is pressed during operation, the UV antibacterial unit is
activated for 30 min. and cleans the air blown from the air conditioner.
This button is for turning the air conditioner on and off.
: When you press this button, regardless of whether the unit is
operating or stopping, the unit operates for one hour and then shuts
down.
Sensor
(Cover closed)
ON/OFF operation button
1 HR. TIMER button
Temperature setting buttons (TEMP.)
MODE selector button
NIGHT SETBACK button
HIGH POWER button
OFF TIME
Advance button
setting
Return button
buttons
CLOCK button
Time display selector button
ACL button
mark appears