Operation With The Remote Control Unit; Automatic Operation - Technibel MPAF180R5I Operating Instructions Manual

1. Automatic Operation

NOTE
NOTE
12
Operation with the Remote Control
Unit
When the remote control's S/M switch is at the "S" (Single) position
This unit automatically switches between cooling operation and heating
operation according to the difference between the room temperature and the
temperature setting.
When the remote control's S/M switch is at the "M" (Multiple) position
Unlike when the switch is at the "S" position as described above, the function
for automatically switching between cooling and heating does not work.
Check that the circuit breaker on the power panel is turned on.
Once mode is selected and the unit is preset by following the steps below,
you can have the air conditioner automatically bring the room to the desired
temperature simply by pressing the ON/OFF operation button.
STEP 1 Press the MODE selector button to
STEP 2 Press the ON/OFF operation button.
To stop the air conditioner, press the ON/OFF operation button again.
• To change the temperature setting; press the temperature setting buttons
and change the setting to the desired temperature.
STEP 2
STEP 1
.