Table of Contents
Advertisement
Chapter 3 Basic Operations — Switching on/off the projector
Initial setting (screen setting)
Set the screen format (aspect ratio) and display position of the image.
After completed the initial setting, you can change the settings of each item from the [DISPLAY OPTION] menu →
[SCREEN SETTING].
1)
Press qw to switch the setting.
f Proceed to Step 4) when [16:10] is selected.
2)
Press as to select [SCREEN POSITION].
3)
Press qw to adjust.
4)
Press the <ENTER> button to proceed to the initial setting.
Initial setting (time zone)
Set [TIME ZONE] in accordance with the country or region where you use the projector.
After completed the initial setting, you can change the setting from the [PROJECTOR SETUP] menu → [DATE
AND TIME]. The current settings are displayed in [LOCAL DATE] and [LOCAL TIME].
1)
Press qw to switch the setting.
2)
Press the <ENTER> button to proceed to the initial setting.
44 - ENGLISH
INITIAL SETTING
SCREEN FORMAT
16:10
SCREEN POSITION
Set as necessary for the screen in use.
CHANGE
SET
ENTER
INITIAL SETTING
SCREEN FORMAT
16:9
0
SCREEN POSITION
Set as necessary for the screen in use.
CHANGE
MENU SELECT
SET
ENTER
INITIAL SETTING
TIME ZONE
+09:00
20XX/01/01
LOCAL DATE
12：34：56
LOCAL TIME
Please set up a time zone according to the area of your
country or region.
CHANGE
SET
ENTER
4/6
4/6
5/6
Advertisement
Table of Contents
