Table of Contents
Advertisement
[Basic control] page
Click [Projector control] → [Basic control].
1
[POWER]
Turns on/off the power.
2
[SHUTTER]
Switches whether to use the shutter function (enabled (shutter:
closed)/disabled (shutter: open)).
3
[OSD]
Switches on (display)/off (hide) the on-screen display function.
[Detail control] page
Click [Projector control] → [Detail control].
1
Control of the projector
The projector is controlled by clicking the buttons in the same
way as the buttons on the remote control. After control, the on-
screen display of the projector at the right of the control page is
updated.
2
[SUB MEMORY]
Switches the sub memory.
3
[DAYLIGHT VIEW]
Switches the day light view setting.
4
[FREEZE]
Temporarily pauses the image.
136 - ENGLISH
Chapter 5 Operations — Web control function
1
2
3
4
5
1
2
3
4
5
6
4
[SYSTEM]
Switches the system method.
5
On-screen display of the projector
Displays the same items as shown on the on-screen display
of the projector. You can check or change the settings of the
menus. It is displayed even if the on-screen display function is
set to off (hide).
6
[INPUT SELECT]
Switches the input signal.
6
7
8
9
5
[P IN P]
Switches the P IN P setting.
6
[WAVEFORM MONITOR]
Displays the waveform of the input signal.
7
[MUTE]
Switches whether to use the mute function.
8
[TEST PATTERN]
Displays the test pattern.
9
[GET OSD]
Updates the on-screen display of the projector at the right of the
control page.
Advertisement
Table of Contents
