Table of Contents
Advertisement
Chapter 7 Appendix — Precautions for attaching the Ceiling Mount Bracket
Precautions for attaching the Ceiling Mount Bracket
f When installing the projector to a ceiling, be sure to use the specified optional Ceiling Mount Bracket (Model
No.: ET-PKD120H (for High Ceilings), ET-PKD120S (for Low Ceilings), ET-PKD130B (Projector Mount
Bracket)). The Ceiling Mount Bracket (Model No.: ET-PKD120H (for High Ceilings), ET-PKD120S (for Low
Ceilings)) is used in combination with the Ceiling Mount Bracket (Model No.: ET-PKD130B (Projector Mount
Bracket)).
f Attach the drop-prevention set that comes with the Ceiling Mount Bracket to the projector. If you need the drop-
prevention set (Service Model No.: TTRA0214) is necessary, consult your dealer.
f Ask a qualified technician to do the installation work such as mounting the projector on the ceiling.
f Panasonic takes no responsibility for any damage to the projector resulting from use of the Ceiling Mount
Bracket not manufactured by Panasonic or the inappropriate choice of location for installing the Ceiling Mount
Bracket, even if the warranty period of the projector has not expired.
f Unused products must be removed promptly by a qualified technician.
f Use a torque screwdriver or Allen torque wrench to tighten bolts to their specified tightening torques. Do not use
electric screwdrivers or impact screwdrivers.
f Read the Installation Instructions of the Ceiling Mount Bracket for details.
f The model numbers of accessories and optional accessories are subject to change without prior notice.
Bottom view
174 - ENGLISH
Model No. of Ceiling Mount Bracket: ET-PKD120H (for High Ceilings)
ET-PKD120S (for Low Ceilings)
ET-PKD130B (Projector Mount Bracket)
Torque: (M6) 4 ± 0.5 N·m
M6
15 mm (19/32")
Advertisement
Table of Contents
