Table of Contents
Advertisement
Problems
Cannot control the
projector with Art-Net.
The DIGITAL LINK input
image is not displayed.
Attention
f If problems persist even after checking the preceding points, consult your dealer.
152 - ENGLISH
Chapter 6 Maintenance — Troubleshooting
f Are the connections between the twisted-pair-cable transmitter and an external
device, and between the twisted-pair-cable transmitter and projector correctly done?
f Is [Art-Net SETUP] set to other than [OFF]?
f Are [NET], [SUB NET], [UNIVERSE], and [START ADDRESS] set correctly?
f Is the cable compatible to the condition of the projector used?
f Are the connections between the twisted-pair-cable transmitter and an external
device, and between the twisted-pair-cable transmitter and projector correctly done?
f Is [DIGITAL LINK MODE] set to [AUTO] or [DIGITAL LINK]? Is it set to
[ETHERNET]?
f Is a signal which is not compatible with a twisted-pair-cable transmitter being input?
Points to be checked
Page
―
124
124
37
―
122
―
Advertisement
Table of Contents
