Table of Contents
Advertisement
Quick Links
The Quick Reference Card provides a quick overview of your spa's
main functions and the operations accessible with your digital control pad.
Spa functions
k-19-in
series of k-19 keypads for in.xe spa systems
series of k-19 keypads for in.xe spa systems
Key 1
Press Key 1 key to turn Pump 1 on at low speed. Press a
second time to turn pump to high speed (with a dual-speed
pump). A third time turns pump off.
A built-in timer automatically turns pump off after 20 minu-
tes, unless pump has been manually deactivated fi rst.
The "Pump 1" indicator lights up when Pump 1 is on.
With dual-speed pump, indicator will fl ash when
Pump 1 is on at low speed.
Key 2
Press Key 2 key to turn Pump 2 on at low speed. Press
a second time to turn pump to high speed. A third time
turns pump off. A built-in timer automatically turns pump
off after a prede-termined period of time, unless it has been
manually deactivated fi rst.
The "Pump 2" indicator lights up when Pump 2 is on.
The indicator will fl ash when Pump 2 is on at low speed.
K ey 2
Press Key 2 to turn Pump 2 on at high speed. Pressing a sec-
ond time turns blower on. A third press turns Pump 2 off but
leaves blower on. A fi nal press turns blower off. A built-in
timer automatically turns Pump 2/blower off after 20 minutes,
unless Pump 2/blower has been manually deactivated fi rst.
The "Pump 2" indicator
lights up when Pump 2 is on.
(2 Pump System)
(2-Pump/Blower System)
The "Blower" indicator
lights up when blower is on.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Gecko Aeware k-19-in
Summary of Contents for Gecko Aeware k-19-in
- Page 1 k-19-in series of k-19 keypads for in.xe spa systems series of k-19 keypads for in.xe spa systems The Quick Reference Card provides a quick overview of your spa’s main functions and the operations accessible with your digital control pad. Spa functions Key 1 Press Key 1 key to turn Pump 1 on at low speed.
- Page 2 Light key Press Light key to turn light on. Press a second time to turn light off. A built-in timer automatically turns light off after 2 hours, unless it has been manually deactivated fi rst. The “Light” indicator lights up when light is on.
- Page 3 Filter cycle frequency Press Light key again. The display will show Fx, with "x" representing the number of fi lter cycles per day (up to 4). (Default: twice a day). Use Up or Down key to change setting. When the desired setting is displayed, press Light key to confi...
- Page 4 Troubleshooting An internal hardware error has been detected in in.xe. Contact dealer or service supplier. The system has shut the heater down because the temperature at the heater has reached 119°F (48°C). Do not enter the water! Remove the spa cover and allow the water to cool down, then shut power off and power your spa up again to reset the system.
Need help?
Do you have a question about the Aeware k-19-in and is the answer not in the manual?
Questions and answers