Table of Contents
Advertisement
Quick Links
Two pump system
The Quick Reference Card provides a quick overview of your spa's
main functions and the operations accessible from your keypad.
Spa functions
Key 1
Press Key 1 to turn Pump 1 on at low speed. Press a second time to turn pump to
high speed (with a dual-speed pump). A third time turns pump off.
A built-in timer automatically turns pump off after 20 minutes*, unless pump has
been manually deactivated first.
The "Pump 1" indicator lights up when Pump 1 is on.
With dual-speed pump, indicator will flash when Pump 1 is on at low speed.
Key 2 (2 Pump System)
(If equipped with Pump 2)
Press Key 2 to turn Pump 2 on at low speed. Press a second time to turn pump to
high speed. A third time turns pump off.
A built-in timer automatically turns pump off after 20 minutes*, unless it has been
manually deactivated first.
The "Pump 2" indicator lights up when Pump 2 is on.
The indicator will flash when Pump 2 is on at low speed.
K
ey 2 (2-Pump/Blower System)
(If equipped with blower)
Press Key 2 to turn Pump 2 on at high speed. Pressing a second time turns blower on.
A third press turns Pump 2 off but leaves blower on. A final press turns blower off.
A built-in timer automatically turns Pump 2/blower off after 20 minutes*, unless
Pump 2/blower has been manually deactivated first.
The "Pump 2" indicator
lights up when Pump 2 is on.
* Default time
K-19
The "Blower" indicator
lights up when blower is on.
Single pump system
Advertisement
Table of Contents
Related Manuals for Gecko K-19
Summary of Contents for Gecko K-19
- Page 1 K-19 Two pump system Single pump system The Quick Reference Card provides a quick overview of your spa’s main functions and the operations accessible from your keypad. Spa functions Key 1 Press Key 1 to turn Pump 1 on at low speed. Press a second time to turn pump to high speed (with a dual-speed pump).
- Page 2 Light key Press the Light key to turn light on. Press a second time to turn light off. A built-in timer automatically turns light off after 2 hours, unless it has been manually deactivated first. The “Light” indicator lights up when light is on.
- Page 3 Filter cycle frequency Press the Light key again. The display will show Fx, with "x" representing the number of filter cycles per day (up to 4). (Default: twice a day). Use Up or Down key to change setting. When the desired setting is displayed, press the Light key to confirm.
- Page 4 Call your dealer or service supplier. No low level configuration software has been installed into the system. Call your dealer or service supplier. © Groupe Gecko Alliance Inc., 2014 All trademarks or registered trademarks are the property of their respective owners.
Need help?
Do you have a question about the K-19 and is the answer not in the manual?
Questions and answers