Gecko in.k1000+ Quick Reference Card

Please consult your spa user manual for complete info on the features of your spa system.
full-featured color capacitive touchscreen display keypad for spas
Gecko's new version of its in.k1000 capacitive touch screen display keypad boasts a new state of
the art touch screen with more precise fingertip contact areas for accurate target selection, enabling easier
and more precise interactions. in.k1000+ features optimal water resistance and lots of memory.
All-on or all-off key
(one touch activation)
mode selection
wheel (settings
and accessories)
Notification icons at the top right-hand side of the screen show the status of connected value-added accessories.
in.clear
system is on
turn keypad on
3 minutes after the last pump is turned off, the
screen will shut off if there is no touch activity.
Touch the screen to turn on the keypad.
Then follow the instructions on the screen to
access the main screen.
1
Quick Reference Card
in.k1000+
interactive display icons
(main spa functions)
notification icons
in.clear
system is idle system is off
in.stream 2 audio in.stream 2 audio
system is on system is off
spas functions
Quick and easy step-by-step instructions to control the main functions and
to configure system settings of your spa from its in.k1000+ main spa keypad.
all-on, all-off target key
in.k1000+ features an all-on or all-off one touch
activation key. When pressed, it tops or starts all
working components and accessories at once.
+
in.clear system is connected
to wifi
in.mix
is installed
From the home page, you can access the
following modes:
• swim (if configured)
• sanitization (with in.clear connected)
• audio (with in.stream 2 connected)
• color (with in.mix installed)
• spa
• settings
To select a mode, slide the left wheel up or down
until the desired icon menu is highlighted in the
middle.
direct to function
selection wheel
(settings and
additional options)
on-screen
system message
and reminder
system is not
connected to wifi