Advertisement
21. KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents. DON'T USE IN
DANGEROUS ENVIRONMENT. Don't use power tools in damp or wet locations, or expose them to
rain. Keep work area well lighted. Keep the floor around the machine clean and free of scrap material,
oil and grease.
22. Give your work undivided attention. Looking around, carrying on a conversation and "horse-play" are
careless acts that can result in serious injury.
23. Do not overreach or use excessive force to perform any machine operation.
24. Use the right machine. Do not force a machine or attachment to do a job for which it was not
designed. The right tool will do the job better and safer.
25. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow
instructions for lubricating and changing accessories.
26. Make sure the work piece is securely attached or clamped to the table. Never use your hand to hold
the work piece.
27. Do not stand on the machine. Serious injury could occur if the machine tips over.
28. Remove loose items and unnecessary work pieces from the area before starting the machine.
35. DON'T FORCE TOOL. It will do the job better and safer at the rate for which it was designed.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible machine damage.
This means that if precautions are not heeded, it may result in serious injury or possibly
even death.
Specifications
Model ........................................................................................................................................ BP-1696H
Stock Number................................................................................................................................ 752102
Capacity (mild steel) ................................................................................................................... 16 Gauge
Bending Length Capacity ...................................................................................................................... 96"
Maximum Box Depth .............................................................................................................................. 4"
Maximum Lift of Beam ...................................................................................................................... 2-1/4"
Beam Adjustment ................................................................................................................................... 1"
Number of Fingers and Width ....................................................................... 5 at 3"; 6 at 4"; 9 at 5"; 2 at 6"
Finger Nose Angle ................................................................................................................................. 45
Finger Nose Radius ........................................................................................................................... 1/32"
Overall Dimensions (Width x Depth x Height) ......................................................................... 122"x31"x63"
Weight ......................................................................................................................................... 1,985 lbs
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Walter Meier (Manufacturing) Inc., reserves the right to change specifications at
any time and without prior notice, without incurring obligations.
Read and understand the entire contents of this manual before attempting
assembly or operation! Failure to comply may cause serious injury.
- - SAVE THESE INSTRUCTIONS - -
4
Advertisement
