Ricoh Aficio SP C440DN Field Service Manual page 307

2-302-002 Forced Setting
Sets the environment condition manually.
0: Automatic environment control
1: LL (Low temperature/ Low humidity)
2: ML (Middle temperature/ Low humidity)
3: MM (Middle temperature/ Middle humidity)
4: MH (Middle temperature/ High humidity)
5: HH (High temperature/ High humidity)
6: SLL (Super low temperature/ low humidity)
2-302-003 AHumidity:Thresh1
Adjusts the threshold value between LL and ML.
2-302-004 AHumidity:Thresh 2
Adjusts the threshold value between ML and MM.
2-302-005 AHumidity:Thresh 3
Adjusts the threshold value between MM and MH.
2-302-006 AHumidity:Thresh 4
Adjusts the threshold value between MH and HH.
2-302-007 Temp:Threshold
Adjusts the threshold temperature for SLL. If detected temperature is less than a value
specified by this SP, SLL condition is determined regardless of humidity.
2308 [PaperSize Correct] DFU
Adjusts the threshold value for the paper size correction.
2-308-001 Threshold 1
*ENG [0 to 6 / 0 / 1 /step]
*ENG [0 to 100 / 4 / 0.01 g/m
step]
*ENG [0 to 100 / 8 / 0.01 g/m
step]
*ENG [0 to 100 / 16 / 0.01 g/m
step]
*ENG [0 to 100 / 24 / 0.01 g/m
step]
*ENG [–5 to 30 / 5 / 1 deg/step]
*ENG [0 to 250 / 194 / 1 mm/step]
Threshold 1 ≤ paper:
Paper is detected as "S1" size.
Engine SP Mode Tables - SP2000
3
/
3
/
3
/
3
/
305