Ricoh Aficio SP C440DN Field Service Manual page 274

5. System Maintenance Reference
1-001-018 Duplex: MThick
1-001-019 Duplex: Thick 1
1-001-020 Duplex: Thick 2
1-001-021 Duplex:Plain:1200
1-001-022 Duplex:MThck:1200
1-001-023 Duplex:Thck1:1200
1-001-024 Tray Thin
1-001-026 By-pass Thin
1002
1-002-001 By-pass Table
1-002-002 Paper Tray 1
1-002-003 Paper Tray 2
1-002-004 Paper Tray 3
1-002-005 Paper Tray 4
1-002-006 Duplex
1003
1-003-001 Tray1:Plain
1-003-002 Tray1:MThick
272
[S-to-S Regist]
Adjusts the side-to-side registration by changing the laser main scan start position for
each mode and tray.
Increasing a value: an image is moved to the rear edge of paper.
Decreasing a value: an image is moved to the front edge of paper.
[Paper Buckle] Paper Buckle Adjustment
(Tray Location, Paper Type), Paper Type: N: Normal, MThick: Middle Thick, TH:
Thick
Adjusts the amount of paper buckle at the registration roller by changing the paper
feed timing.
*ENG [–9 to 9 / 0.1 / 0.1 mm/step]
*ENG [–9 to 9 / -1.6 / 0.1 mm/step]
*ENG [–9 to 9 / -2.4 / 0.1 mm/step]
*ENG [–9 to 9 / 0.8 / 0.1 mm/step]
*ENG [–9 to 9 / 0.1 / 0.1 mm/step]
*ENG [–9 to 9 / 0.2 / 0.1 mm/step]
*ENG [–9 to 9 / 0 / 0.1 mm/step]
*ENG [–9 to 9 / 0 / 0.1 mm/step]
*ENG [–4 to 4 / 0.0 / 0.1 mm/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG [–20 to 20 / -1 / 1 mm/step]
*ENG [–20 to 20 / -1 / 1 mm/step]