Wilson Electronics WILSON PRO 4000 User Manual page 13

(PORT/BAND STATUS SCREENS - GREEN LIGHT cont.)
Band Details Screen
Yellow Light
D-Pad with Enter
button
Band Details Screen
WILSON PRO 4000
Status Screen
Close-up
IN-BUILDING MULTI-ANTENNA SIGNAL BOOSTER
In the presence of a strong outdoor
cell tower signal, the 4000 will reduce
it's "boost" (Gain) using internal
Automatic Gain Control (AGC). This
gain reduction is necessary to stay
within FCC requirements. When
this occurs, the 4000 has reached
the 'speed limit' so this is good!
The outside antenna should always
be adjusted until the "DL" bar is
maximized and "AGC" is indicated, if
possible with a weak outside signal,
this may not be possible.
Pressing enter on a highlighted
light with a yellow light (Antenna 1,
Band 12), as shown, will display the
following...
This screen indicates band/port gain
has been reduced because of the
oscillation condition detected at a
nearby band/port.
EN 11