Machine Description & Technical Specifications - Record Power DML305-VS Instruction Manual

5. Machine Description & Technical Specifications
MACHINE IDENTIFICATION
There is a plastic identification plate fixed to the machine, containing the specifications and serial number.
GETTING TO KNOW YOUR MACHINE
3
2
1
17
22
19
21
1 Lifting handle
2 Handwheel
3 Face plate
4 4 prong drive centre
5 Tool rest
6 Revolving centre
7 Tailstock
8 Tailstock handwheel
SPECIFICATIONS
Swing over bed:
Swing over tool rest base:
Working distance between centres: 406 mm
Motor:
Full load current:
Speed ranges:
Thread:
Taper:
Hole through spindle:
Tailstock spindle travel:
Noise Emission:
8
DML305-VS Manual 3.0.indd 8
4
6
7
5
16 15
18
20
9 Tailstock spindle locking arm
10 Tool rest base
11 Tool holder
12 Motor
13 Lathe bed
14 Tailstock locking lever
15 Switch and speed control unit
16 Tool rest base locking lever
305 mm
240 mm
230V / 50 Hz, 1/2 hp / 375 W
4.6 A
170-1170, 290-2040, 540-3840rpm
3/4" x 16 TPI or M33 x 3.5 mm (please refer to machine specification label)
1 or 2 Morse Taper (please refer to machine specification label)
9.5 mm
63.5 mm
Sound power level < 83 dB (A)
Sound pressure level < 83 dB (A)
8
9 10
14 13
17
18
19
20
21
22
12
11
Indexing lock
4 mm Allen key
Spanner
2 x screw and washers for tool holder
Knock out bar
Tool holder
19/09/2013 11:13