Advertisement
DML24X-MK2
24" Beginners
Woodturning Lathe
Woodworking Machines & Accessories
Telephone: 0870 770 1777
Email: sales@recordpower.co.uk
Facsimile: 0870 770 1888
http://www.recordpower.co.uk
Instruction
Manual
IMPORTANT
For your safety read
instructions carefully before
assembling this product.
Save this manual for
future reference.
Advertisement
Related Manuals for Record Power DML24X-MK2
Summary of Contents for Record Power DML24X-MK2
- Page 1 Instruction DML24X-MK2 24” Beginners Manual Woodturning Lathe IMPORTANT For your safety read instructions carefully before assembling this product. Save this manual for future reference. Woodworking Machines & Accessories Telephone: 0870 770 1777 Email: sales@recordpower.co.uk Facsimile: 0870 770 1888 http://www.recordpower.co.uk...
- Page 2 Dear Customer, Thank you for investing in a RECORD POWER® WOODTURNING LATHE. Like all our products, it is made to the highest production standards and is designed to give you years of satisfying service. A complete list of accessories to enhance your enjoyment of woodturning is included at the back of this manual.
-
Page 3: Table Of Contents
Terms and conditions Record Power guarantees the mechanical parts of its machines against faulty construction for a period of 5 years from date of purchase. The guarantee is limited to the obligation to repair or replace any parts which prove to be faulty. -
Page 4: Health & Safety Guidance
Health & Safety Guidance READ ALL THE INSTRUCTIONS IN THIS MANUAL 15. Maintain tools with care. • Follow instructions for lubrication and changing accessories. CAREFULLY BEFORE ASSEMBLY, INSTALLATION AND USE • Inspect electric cords periodically and, if damaged, have them OF THIS PRODUCT. - Page 5 Additional Safety Instructions For Woodturning Lathes SAFETY IS A COMBINATION OF OPERATOR tool rest before commencing the cut. 21. When the tool rest base unit is not in use (as when sanding), COMMON SENSE AND ALERTNESS AT ALL it should be moved away from the headstock, and the tool rest TIMES WHEN THE LATHE IS BEING USED.
-
Page 6: Specification
Before assembling and using your lathe, you must have a sturdy The brown wire must be connected the terminal which is marked bench or stand for it. Alternatively the Record Power® DML24S with the letter ‘L’ Leg Set. If you wish to build your own bench, remember that the lathe is heavy (see Specifications for correct weight). - Page 7 1. Bore 2 holes in the bench 13mm (1/2") dia., 86mm (3.3/8") from the front edge of the bench and 1067mm (42") apart (See Fig.1). Fig. 1 Drill 2 holes 13mm Lathe Position Dia. in bench top for 12mm Dia. threaded bar End bracket Single pad nearest to front of...
-
Page 8: Control Identification And Function
Control Identification & Function CONTROL FUNCTION OPERATION / COMMENT ON / OFF Switch Starts and Stops Motor. No Volt Release switch Green (1) START, Red (0) STOP. If power supply is interrupted during operation lathe will not restart until START button is pressed. Tool rest Supports turning tool Position as per lathe safety instructions (section 2, part 5) -
Page 9: Procedure For Changing Speed
Procedure For Changing Speed WARNING It is normal for the motor to run hot, therefore care should be taken to avoid touching the motor particularly when changing speed. WARNING Ensure belt guard is in place and locked before using lathe. Loose items, clothing or hands may enter opening and become entangled in rotating parts. -
Page 10: Spare Part Identification
Spare Part Identification... - Page 11 Item Part Description Item Part Description End bracket Poly V-belt, 4 rib Angle strap CLKB M6 Dog point knob ZAES Washer – M12 large ZABG M12 x 90mm High tensile hex. bolt CKSM Spindle pulley – 4 speed CLRC M8 Ratchet handle - Toolrest CKMM Motor pulley –...
- Page 12 EU Declaration of Conformity Cert No: EU / ALL LATHES / 6 RECORD POWER LIMITED, at Unit B, Adelphi Way, Ireland Industrial Estate, Staveley S43 3LS declares that the machinery described:- Type: Woodworking Lathe Model No: DML24X-MK2 Serial No .................