Configuring Pppoe; Configuring Ntp Server - HIKVISION DS-76O4NI-K1 B User Manual

Step 5 Click the Apply button to save and exit the interface.

11.2.3 Configuring PPPoE

Purpose:
Your NVR also allows access by Point-to-Point Protocol over Ethernet (PPPoE).
Step 1 Enter the Network Settings interface.
Menu >Configuration> Network
Step 2 Select the PPPoE tab to enter the PPPoE Settings interface, as shown in Figure 11-10.
Step 3 Check the PPPoE checkbox to enable this feature.
Step 4 Enter User Name, and Password for PPPoE access.
The User Name and Password should be assigned by your ISP.
Step 5 Click the Apply button to save and exit the interface.
Step 6 After successful settings, the system asks you to reboot the device to enable the new
settings, and the PPPoE dial-up is automatically connected after reboot.
You can go to Menu >Maintenance>System Info >Network interface to view the status of PPPoE
connection.

11.2.4 Configuring NTP Server

Purpose:
A Network Time Protocol (NTP) Server can be configured on your NVR to ensure the accuracy of
system date/time.
Network Video Recorder User Manual
Figure 11-9 NO-IP Settings Interface
Figure 11-10 PPPoE Settings Interface
157