Table of Contents
Advertisement
Before configuring the Email settings, the NVR must be connected to a local area network (LAN)
that maintains an SMTP mail server. The network must also be connected to either an intranet or
the Internet depending on the location of the e-mail accounts to which you want to send
notification.
Step 1 Enter the Network Settings interface.
Menu >Configuration> Network
Step 2 Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS Server in the
Network Settings menu, as shown in Figure 11-20.
Step 3 Click Apply to save the settings.
Step 4 Select the Email tab to enter the Email Settings interface.
Step 5 Configure the following Email settings:
Enable Server Authentication (optional): Check the checkbox to enable the server
authentication feature.
User Name: The user name of sender's account registered on the SMTP server.
Password: The password of sender's account registered on the SMTP server.
Network Video Recorder User Manual
Figure 11-20 Network Settings Interface
Figure 11-21 Email Settings Interface
163
Advertisement
Table of Contents
