Recording With [4K Pre-Burst] - Panasonic LUMIX DMC-GX8 Owner's Manual For Advanced Features

6. Shutter and Drive Settings

Recording with [4K Pre-Burst]

1
Select [ ] ([4K Pre-Burst]).
A Number of recordings that can be made
•
If you press the shutter button halfway, the aperture value
and shutter speed will be displayed.
2
Press the shutter button fully.
•
Recording of a 4K burst file will be performed for
approximately 1 second before and after the moment that
the shutter button is pressed.
•
When [Auto Review] is enabled, the picture selection
screen will be displayed automatically. To continue recording, press the shutter button
halfway to display the recording screen.
Recording tips
Focus and exposure
Auto Focus adjusts focus continuously, and except in Manual Exposure Mode, it
also adjusts exposure continuously.
•
Focus cannot be adjusted at the desired timing by pressing the shutter button
halfway or operating other controls.
•
In situations where you want to lock focus and exposure, such as when the subject
is not at the center, use [AF/AE LOCK].
Battery drainage and camera temperature
When the drive mode is set to [
and the camera temperature rises.
•
Select [ ] ([4K Pre-Burst]) only when recording.
•
For information on how to select and save pictures from recorded 4K burst files, refer to P188.
•
When the drive mode is set to [
cases, the camera may display [
function to protect itself. Wait until the camera cools down.
•
When recording with [
recording with the normal recording screen.
(P178)
(P165)
] ([4K Pre-Burst]), the battery drains faster
] ([4K Pre-Burst]), the camera temperature rises. In some
], switch to [
] ([4K Pre-Burst]), images may not be displayed as smoothly as when
184
] ([4K Burst]), and disable the recording
4:3
AFS AFS
60 p
4K
0
1200 1200 1200
A