1. Manuals
  2. Brands
  3. AXIOMTEK Manuals
  4. Touch Panel
  5. MPC153-834
  6. User manual

AXIOMTEK MPC153-834 User Manual

All-in-one 15.6 wxga tft fanless medical touch panel computer with intel atomtm j1900 processor onboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MPC153W-834
All-in-One 15.6" WXGA TFT Fanless Medical
Touch Panel Computer with
Intel® AtomTM J1900 Processor Onboard
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MPC153-834 and is the answer not in the manual?

Questions and answers

Related Manuals for AXIOMTEK MPC153-834

Summary of Contents for AXIOMTEK MPC153-834

  • Page 1 MPC153W-834 All-in-One 15.6” WXGA TFT Fanless Medical Touch Panel Computer with Intel® AtomTM J1900 Processor Onboard User’s Manual...

  • Page 2: Disclaimers

    Axiomtek does not make any commitment to update the information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Axiomtek Co., Ltd.

  • Page 3: Symbol Index

    CE Marking Manufactured by：address of the MFG EC REP address Refer to instruction 4 manual / booklet Serial Number AXIOMTEK Co., Ltd. 8F., No.4, Lane 235, Baoqiao Road, Xindian District, New Taipei City 231, Taiwan (R.O.C.) http://www.axiomtek.com.tw Made in Taiwan...

  • Page 4: Safety Precautions

    Most electronic components are sensitive to static electrical charge. Disconnect the power cords from the MPC153-834 Series before making any installation. Be sure both the system and the external devices are turned OFF. Sudden surge of power could ruin sensitive components. Make sure the MPC153-834 Series is properly grounded.

  • Page 5: Table Of Contents

    Table of Contents Disclaimers ...................... i Disclaimers ..................... ii CAUTION ......................ii Symbol Index ....................iii Safety Precautions ..................iv Chapter 1 Introduction ..........1 General Description ................2 Specifications ..................3 Dimensions ..................5 I/O Outlets .................... 7 Packing List ..................8 Chapter 2 Hardware and Installation ......
  • Page 6 Boot Menu ..................51 Save&Exit ................... 52 Chapter 4 Drivers Installation ......53 System ....................53 4.1.1 Win 7 ......................53 4.1.2 Win 8/8.x ....................54 Touch Screen ..................55 4.2.1 Specification ....................55 4.2.2 Driver Installation- Windows 7/8.x ............. 56 Embedded O.S.

  • Page 7: Chapter 1 Introduction

    MPC153-834 User’s Manual Chapter 1 Introduction This chapter contains general information and detailed specifications of the MPC153-834. Chapter 1 includes the following sections:  General Description  Specifications  Dimensions  I/O Outlets  Package List Introduction...

  • Page 8: General Description

    MPC153-834 User’s Manual General Description The MPC153-834 is a fan-less and compact-size touch panel computer, equipped with a 15.6” TFT LCD display, 5W flat resistive touch or project capacitive multi-touch for option and low power consumption Intel® Celeron® Processor J1900. The MPC153-834 supports Windows 7, Windows 8.x and Windows embedded OS.

  • Page 9: Specifications

    1 x Mini-card slot (supports mSATA, optional)  Storage One CFast™ or mSATA   One half-slim SATA SSD  Power connector  MPC153-834-FR-DC/MPC153-834-PCT-DC : 9VDC to 36VDC with phoenix power connector or  MPC153-834-FR-J/MPC153-834-PCT-J: External 60W Medical AC Adapter with screw type connector Introduction...
  • Page 10 MPC153-834 User’s Manual System Specification  15.6” WXGA(1366x768) LCD with LED backlight  Project capacitive multi-touch or 5 wired flat resistive touch  Fanless Heat Dispensing Design  Disk drive housing:  One half-slim SATA drive  Net Weight ...

  • Page 11: Dimensions

    MPC153-834 User’s Manual Dimensions This diagram shows you dimensions and outlines of the MPC153-834. Introduction...
  • Page 12 MPC153-834 User’s Manual Introduction...

  • Page 13: I/O Outlets

    MPC153-834 User’s Manual I/O Outlets Please refer to the following illustration for I/O locations of the MPC153-834. NOTE The volume control function only can be performed under the windows operation system with AXIOMTEK volumeSYNC program. Introduction...

  • Page 14: Packing List

    Driver CD x1  Screws for HDD x4  Phoenix connector x1 (for MPC153-834)  Medical Power Adapter & power cord (for MPC153-834-J) If you can not find the package or any items are missing, please contact Axiomtek distributors immediately. Introduction...

  • Page 15: Hardware And Installation

    MPC153-834 User’s Manual Chapter 2 Hardware and Installation The MPC153-834 provides rich I/O ports and flexible expansions for you to meet different demand, for example, CFast™ card. The chapter will show you how to install the hardware. It includes: CFast™ Card ...

  • Page 16: Cfast™ Card Installation

    MPC153-834 User’s Manual CFast™ card Installation The MPC153-834 provides one CFast slot for users to install CFast™ card. Please refer to the following instructions for installation: Step 1 Turn off the system, and unplug the power cord. Remove the cover of CFast™ socket.

  • Page 17: Sbc87834 Jumpers And Connectors

    MPC153-834 User’s Manual SBC87834 Jumpers and Connectors Component Side Hardware and Installation...
  • Page 18 MPC153-834 User’s Manual Solder Side Hardware and Installation...

  • Page 19: Jumper Settings

    MPC153-834 User’s Manual 2.2.1 Jumper Settings Making the proper jumper settings configure the SBC87834 to match the needs of your application. The following table shows the default jumper settings for the onboard devices. ★ Default Setting Jumper Jumper Setting ★ Panel backlight control PWM mode...

  • Page 20: Connectors

    MPC153-834 User’s Manual 2.2.2 Connectors The connectors allow the CPU Board to connect with other parts of the system. Ensure that all connectors are in place and firmly attached. The following table lists the function of each connector on the SBC87834.
  • Page 21 MPC153-834 User’s Manual LVDS connector: CN1 CN1 Pin Assignment Pin Description Description LVDSA_DATAN0 LVDSB_DATAN2 LVDSA_DATAP0 LVDSB_DATAP2 DDC DATA DDC CLOCK LVDSA_DATAN1 LVDSA_DATAN3 LVDSB_DATAN3 LVDSA_DATAP1 LVDSB_DATAN0 LVDSA_DATAP3 LVDSB_DATAP3 LVDSB_DATAP0 LVDSA_DATAN2 LVDSA_CLKN LVDSB_CLKN LVDSA_DATAP2 LVDSB_DATAN1 LVDSA_CLKP LVDSB_CLKP LVDSB_DATAP1 Hardware and Installation...
  • Page 22 MPC153-834 User’s Manual LVDS inverter connector: CN2 CN2 Pin Assignment Pin Description Pin Description Inverter ON-OFF +12V +12V Backlight control +12V TOUCH connector: CN3 CN3 Pin Assignment Description Sense Hardware and Installation...
  • Page 23 MPC153-834 User’s Manual HDD power connector: CN4 CN9 Pin Assignment Pin Description +12V FRONT PANEL pin header: CN6 CN6 Pin Assignment Description Description + 5V Beep BUZZER Beep PWBTN RESET SATA LED +3.3V Hardware and Installation...
  • Page 24 MPC153-834 User’s Manual SIM card connector: CN7 CN7 Pin Assignment Pin Description Description UIM PWR UIM RST UIM VPP UIM CLK UIM DATA Power connector: CN9 CN9 Pin Assignment Pin Description DCIN (9V -36V) DCIN (9V -36V) Hardware and Installation...
  • Page 25 MPC153-834 User’s Manual Digital I/O pin header: CN10 CN10 Pin Assignment Pin Description Description GPIO0 GPIO1 GPIO2 GPIO3 GPIO4 GPIO5 GPIO6 GPIO7 GPIO8 GPIO9 GPIO10 GPIO11 GPIO12 GPIO13 GPIO14 GPIO15 Speaker Out & MIC IN connector: CN11 CN11 Pin Assignment...
  • Page 26 MPC153-834 User’s Manual VGA Cable Connector: CN12 CN12 Pin Assignment Signal Signal Green N.C. Blue N.C. DDC DATA N.C. GND . Horizontal Sync Vertical Sync DCC CLK N.C. USB CONNECTOR (reserved): CN14/CN20 CN14/CN20 Pin Assignment Pin Description Hardware and Installation...
  • Page 27 MPC153-834 User’s Manual Audio Lin In connector: CN15 CN15 Pin Assignment Pin Description LINE IN L LIN IN R Power lamp connector: CN16 CN16 Pin Assignment Pin Description Description Power (+5V) Power button connector: CN17 CN17 Pin Assignment Pin Description...
  • Page 28 MPC153-834 User’s Manual Touch function enable/disable & LED indicator connector: CN18 CN18 Pin Assignment Pin Description ON/OFF button Panel control Keypad connector: CN19 CN19 Pin Assignment Pin Description Panel ON/OFF Normal LED Power LED Blacklight down Blacklight up Hardware and Installation...
  • Page 29 MPC153-834 User’s Manual USB box header: USB1 USB1 Pin Assignment Pin Description Description USB- USB- USB+ USB+ Serial Port box header: COM3, COM4 COM3, COM4 Pin Assignment Pin Description Description Hardware and Installation...

  • Page 30: Ethernet

    MPC153-834 User’s Manual Ethernet The MPC153-834 is equipped with two high performance Plug and Play Ethernet interfaces, full compliant with IEEE 802.3 standard, and can be connected with a RJ-45 LAN connector. Please refer to detailed pin assignment list below:...

  • Page 31: Mountings - Wall/Desktop/Vesa

    MPC153-834 User’s Manual Mountings – Wall/Desktop/VESA There are several mounting ways for the MPC153-834, Wall, Desktop and VESA mountings. 2.4.1 Wall-Mounting The MPC153-834 is designed for Wall mounting application. Please refer to the following steps: Fix wall mount bracket on the back of the unit.

  • Page 32: Desktop-Mounting

    MPC153-834 User’s Manual 2.4.2 Desktop-Mounting The MPC153-834 is designed for desktop mounting application. Please refer to the following steps: Step 1 Find out the screws as marked on the back side of chassis. Step 2 Assemble the desktop stand to the chassis, and fix the screws.

  • Page 33: Hdd Installation

    MPC153-834 User’s Manual HDD Installation The MPC153-834 provides a convenient bracket for users to install half-slim SATA drive. Please follow the steps: Step 1 Unscrew eight screws to remove the back cover. Step 2 Fix the half-slim SATA drive into the bracket, and plug the data and power cable to HDD.

  • Page 34: Dram Installation

    MPC153-834 User’s Manual DRAM Installation The MPC153-834 provides one 204-pin DDR3L SODIMM socket that support system memory up to 8GB. Please follow steps below to install the memory modules: Step 1 Open the back cover and find out the DIMM socket on main board(SBC87834).
  • Page 35 MPC153-834 User’s Manual Step 3 Install the memory module into the socket and push it firmly down until it is fully seated. The socket latches are levered upwards and clipped on to the edges of the DIMM. Hardware and Installation...

  • Page 36: Mini Cards Card Installation

    Mini cards Card Installation 2.7.1 Wireless LAN Card Installation The MPC153-834 provides two Mini card slots for user to install wireless LAN cards. You can choose either slot 1 or slot 2 to install the wireless LAN card and refer to the following...
  • Page 37 MPC153-834 User’s Manual Step 3 Find the built-in Antenna cable. Step 4 There are two connectors on wireless LAN card. One is MAIN, and the other is auxiliary. Connect antenna cable to MAIN connector on wireless LAN card. Hardware and Installation...

  • Page 38: Msata Card Installation

    MPC153-834 User’s Manual 2.7.2 mSATA Card Installation The MPC153-834 provides one Mini card slot for user to install mSATA. Please choose the slot 2 when installing the mSATA card and refer to the following instructions and illustration: Step 1 Open the back cover and find out the mini-card slot on main board.

  • Page 39: Power Input (Phoenix Type)

    MPC153-834 User’s Manual Power Input (Phoenix type) MPC153-834 equips with a phoenix type power connector. It adopts 9VDC to 36VDC. Please follow the signs on power connector to connect DC power source. －:Power negative +: Power positive G: Safety ground NOTE The safety ground must be connected to ensure the unit working appropriately.
  • Page 40 MPC153-834 User’s Manual This page is intentionally left blank. Hardware and Installation...

  • Page 41: Ami Bios Setup Utility

    MPC153-834 User’s Manual Chapter 3 AMI BIOS Setup Utility This chapter provides users with detailed description how to set up basic system configuration through the AMIBIOS8 BIOS setup utility. Navigation Keys The BIOS setup/utility uses a key-based navigation system called hot keys. Most of the BIOS setup utility hot keys can be used at any time during the setup navigation process.

  • Page 42: Main Menu

    MPC153-834 User’s Manual Main Menu  System Time/Date Use this option to change the system time and date. Highlight System Time or System Date using the <Arrow> keys. Enter new values through the keyboard. Press the <Tab> key or the <Arrow>...

  • Page 43: Advanced Menu

    MPC153-834 User’s Manual Advanced Menu The Advanced menu allows users to set configuration of the CPU and other system devices. You can select any of the items in the left frame of the screen to go to the sub menus: ...
  • Page 44 MPC153-834 User’s Manual  ACPI Sleep State Allow you to select the Advanced Configuration and Power Interface (ACPI) state to be used for system suspend. Here are the options for your selection, Suspend disable and S3 (Suspend to RAM). AMI BIOS Setup Utility...
  • Page 45 MPC153-834 User’s Manual  NCT6106D Super IO Configuration Use this screen to select options for the Super IO Configuration, and change the value of the selected option Serial Port 1-4 configuration Serial port: This option used to enable or disable the serial port.
  • Page 46 MPC153-834 User’s Manual  Serial type This option used to select RS232/422/485 function. AMI BIOS Setup Utility...
  • Page 47 MPC153-834 User’s Manual  NCT6106D H/W Monitor This screen shows the Hardware Health Configuration. AMI BIOS Setup Utility...
  • Page 48 MPC153-834 User’s Manual  CPU Configuration This screen shows the CPU Configuration and Intel virtualization technology enable/disable selected AMI BIOS Setup Utility...
  • Page 49 MPC153-834 User’s Manual  IDE Configuration You can use this screen to select options for the SATA Configuration, and change the value of the selected option.  SATA Mode Use this item to choose the SATA operation mode. Here are the options for your selection, IDE Mode, AHCI Mode.
  • Page 50 MPC153-834 User’s Manual  USB Configuration You can use this screen to select options for the USB Configuration, If USB3.0 function used, XHCI Mode must enable and EHCI must disable. **XHCI default is Auto. AMI BIOS Setup Utility...
  • Page 51 MPC153-834 User’s Manual  LPSS & SCC Configuration You can select any of the items in the frame of the screen to change the OS, the default setting is Win 7. Please be informed to select the Windows 8.x when installing Win 8 or Win 8.1.
  • Page 52 MPC153-834 User’s Manual  Security Configuration The Advanced menu allows users to update the TXE firmware. AMI BIOS Setup Utility...

  • Page 53: Chipset Menu

    MPC153-834 User’s Manual Chipset Menu The Chipset menu allows users to change the advanced chipset settings. AMI BIOS Setup Utility...
  • Page 54 MPC153-834 User’s Manual  North Bridge This screen shows the North Bridge memory information. AMI BIOS Setup Utility...
  • Page 55 MPC153-834 User’s Manual  South Bridge AMI BIOS Setup Utility...

  • Page 56: Security

    MPC153-834 User’s Manual Security AMI BIOS Setup Utility...

  • Page 57: Boot Menu

    MPC153-834 User’s Manual Boot Menu The Boot menu allows users to change boot options of the system. You can select any of the items in the left frame of the screen to go to the sub menus: Setup Prompt Timeout Set the Timeout for wait press key to enter Setup Menu.

  • Page 58: Save&Exit

    MPC153-834 User’s Manual Save&Exit AMI BIOS Setup Utility...

  • Page 59: Chapter 4 Drivers Installation

    MPC153-834 User’s Manual Chapter 4 Drivers Installation System MPC153-834 supports Windows 7, Windows 8/8.1 ,WES 7 and WE8S. To facilitate the installation of system driver, please carefully read the instructions in this chapter before start installing. 4.1.1 Win 7 Insert Driver CD and select the “\Drivers”.

  • Page 60: Win 8/8.X

    MPC153-834 User’s Manual 4.1.2 Win 8/8.x Insert Driver CD and select the “\Drivers”. Select all files and follow the installing procedure. Drivers Installation...

  • Page 61: Touch Screen

    MPC153-834 User’s Manual Touch Screen The MPC153-834 uses either 5-wire analog resistive or projected capacitive multi-touch . There are the specification and driver installation which are listed below. It also can drive the touch panel to get two fingers touch function thatbased on the Windows 7 support.

  • Page 62: Driver Installation- Windows 7/8.X

    MPC153-834 User’s Manual 4.2.2 Driver Installation- Windows 7/8.x The MPC153-834 provides a touch screen driver that users can install it under the operating system Windows 7/8.x. To facilitate installation of the touch screen driver, you should read the instructions in this chapter carefully before you attempt installation.
  • Page 63 MPC153-834 User’s Manual Calibration: To adjust the display with touch panel, click “Calibration” and follow the calibrate point to do calibration; there are five points on screen for calibration. Press OK. Drivers Installation...

  • Page 64: Embedded O.s

    MPC153-834 User’s Manual Embedded O.S. The MPC153-834 provides the WES 7 and WE8S Embedded. The O.S. is supported devices which are listed below. 4.3.1 WES 7 & WE8S Here are supported onboard devices: Onboard Multi I/O  SATA HDD ...

  • Page 65: Appendix A Watchdog Timer

    MPC153-834 User’s Manual Appendix A Watchdog Timer About Watchdog Timer Software stability is major issue in most application. Some embedded systems are not watched by human for 24 hours. It is usually too slow to wait for someone to reboot when computer hangs.

  • Page 66: Wdt Sample Program

    MPC153-834 User’s Manual WDT Sample Program Enable WDT 1.Enable configuration -O 2E 87 -O 2E 87 2. Select Logic device: -O 2E 07 -O 2F 08 3. WDT Device Enable -O 2E 30 -O 2F 01 4. Set timer unit -O 2E F0 -O 2F 00 ...
  • Page 67 MPC153-834 User’s Manual Watchdog Timer...
  • Page 68 MPC153-834 User’s Manual Watchdog Timer...

  • Page 69: Appendix B Volume Control

    Volume Control About Volume Control Axiomtek offers the volume control tool under Windows 7 and Windows 8, people can adjust the system volume depending on your personal taste and the amount of ambient volume in the room after installing the volume control tool.
  • Page 70 MPC153-834 User’s Manual Volume Control...
  • Page 71 MPC153-834 User’s Manual Follow the installing procedures and press “Close”. Step 2 Volume Control...
  • Page 72 MPC153-834 User’s Manual Volume Control...
  • Page 73 MPC153-834 User’s Manual Volume Control...
  • Page 74 MPC153-834 User’s Manual Volume Control...
  • Page 75 MPC153-834 User’s Manual Step 3 System auto reboot, installation completed. Volume Control...
  • Page 76 MPC153-834 User’s Manual Select “△” icon then finding out the “Axiomtek” to ensure the volume driver Step 4 is installed appropriately. Step 5 How to use the Volume Control Select volume +- to adjust the system volume. Volume Control...

  • Page 77: Removed Volume Control Tool

    MPC153-834 User’s Manual Removed Volume Control Tool Step 1 According to the OS version, please insert the driver CD and follow the path to select the proper driver, “\Driver\Win8.x\Step 8 – Setup” or \Driver\Win7\Step 8 - Setup”. Volume Control...
  • Page 78 MPC153-834 User’s Manual Follow the procedures and press “Close”. Step 2 Volume Control...
  • Page 79 MPC153-834 User’s Manual Volume Control...
  • Page 80 MPC153-834 User’s Manual Volume Control...
  • Page 81 MPC153-834 User’s Manual Step 3 System auto reboot, uninstallation completed. Volume Control...

Table of Contents