AXIOMTEK GOT5840T-834 User Manual
  1. Manuals
  2. Brands
  3. AXIOMTEK Manuals
  4. Touch Panel
  5. GOT5840T-834
  6. User manual

AXIOMTEK GOT5840T-834 User Manual

All-in-one 8.4” svga tft fanless touch panel computer with intel celeron processor j1900 onboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
GOT5840T-834
All-in-One
8.4" SVGA TFT Fanless Touch Panel
Computer with Intel® Celeron® Processor
J1900 onboard
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GOT5840T-834 and is the answer not in the manual?

Questions and answers

Related Manuals for AXIOMTEK GOT5840T-834

Summary of Contents for AXIOMTEK GOT5840T-834

  • Page 1 GOT5840T-834 All-in-One 8.4” SVGA TFT Fanless Touch Panel Computer with Intel® Celeron® Processor J1900 onboard User’s Manual...

  • Page 2: Disclaimers

    Axiomtek does not make any commitment to update the information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Axiomtek Co., Ltd.

  • Page 3: Safety Precautions

    Turn OFF the system power before cleaning. Clean the system using a cloth only. Do not spray any liquid cleaner directly onto the screen. The GOT5840T-834 comes with a touchscreen. Although the touchscreen is chemical resistant, it is recommended that you spray the liquid cleaner on a cloth first before wiping the screen.

  • Page 4: Table Of Contents

    Table of Contents Disclaimers ......................ii Safety Precautions ....................iii CHAPTER 1 INTRODUCTION ................ 1 General Description ................1 Specifications ..................2 1.2.1 Main CPU Board ....................2 1.2.2 I/O System ......................2 1.2.3 System Specification ..................3 Dimensions ..................4 I/O Outlets ...................
  • Page 5 Embedded O.S.................. 54 4.3.1 WES 7 & WE8S ....................54 APPENDIX A WATCHDOG TIMER .............. 56 About Watchdog Timer ..................56 How to Use Watchdog Timer ................56 WDT Sample Program ..................57 APPENDIX B BACKLIGHT CONTROL ............60 About Backlight Control ...................
  • Page 6 This page is intentionally left blank.

  • Page 7: Chapter 1 Introduction

     Dimensions  I/O Outlets  Package List General Description The GOT5840T-834 is a fan-less and compact-size touch panel computer, equipped with a ○ 8.4” TFT LCD display and low power consumption Intel Atom J1900 2.0GHz processor. ® ® The GOT5840T-834 supports Windows 7, Windows 8.1 , WES 7 and WE8S.

  • Page 8: Specifications

    1 x Mini-card slot (w/SIM slot) 1 x Mini-card slot (supports mSATA, optional)   Storage One CFast™ or mSATA   Power connector  GOT5840T-834 : DC power 9~36VDC (phoenix type)  GOT5840T-834-J : AC 100~240V to DC 12V adapter(Screw type) Introduction...

  • Page 9: System Specification

    GOT5840T-832 User’s Manual 1.2.3 System Specification  8.4” SVGA(800x600) LCD with LED backlight  5 wired resistive Touch  Fanless Heat Dispensing Design  Heat Dispensing Design  Net Weight  1.3 Kgs (2.87 lb)  Dimension (Main Body Size) ...

  • Page 10: Dimensions

    GOT5840T-832 User’s Manual Dimensions This diagram shows you dimensions and outlines of the GOT5840T-834. Introduction...
  • Page 11 GOT5840T-832 User’s Manual Introduction...

  • Page 12: I/O Outlets

     Driver CD x1  Wall-Mount Kit x1  Phoenix connector x1 (for GOT5840T-834)  Power Adapter & power cord (for GOT5840T-834-J) If you can not find the package or any items are missing, please contact AXIOMTEK distributors immediately. Introduction...

  • Page 13: Chapter 2 Hardware Installation

    GOT5840T-832 User’s Manual CHAPTER 2 HARDWARE INSTALLATION The GOT5840T-834 provides rich I/O ports and flexible expansions for you to meet different demand. The chapter will show you how to install the hardware. It includes: CFast™ Card   Serial Port ...

  • Page 14: Sbc87834 Jumpers And Connectors

    GOT5840T-832 User’s Manual SBC87834 Jumpers and Connectors Component Side Hardware Installation...
  • Page 15 GOT5840T-832 User’s Manual Solder Side Hardware Installation...

  • Page 16: Jumper Settings

    GOT5840T-832 User’s Manual 2.2.1 Jumper Settings Making the proper jumper settings configure the SBC87834 to match the needs of your application. The following table shows the default jumper settings for the onboard devices. ★ Default Setting Jumper Jumper Setting ★ Panel backlight control PWM mode Short 1-2 Panel backlight control DC mode Short 3-4...
  • Page 17 GOT5840T-832 User’s Manual PCIe device & mSATA device selection (JP6) The default setting of JP6 is for PCIe mini-card. If you want to install mSATA card on your system, please remember to set this jumper to “2-3 close”. Function Setting PCIe device(default) 1-2 close mSATA device...

  • Page 18: Connectors

    GOT5840T-832 User’s Manual 2.2.2 Connectors The connectors allow the CPU Board to connect with other parts of the system. Ensure that all connectors are in place and firmly attached. The following table lists the function of each connector on the SBC87834. Connectors Label LVDS connector...
  • Page 19 GOT5840T-832 User’s Manual LVDS connector: CN1 CN1 Pin Assignment Description Description LVDSA_DATAN0 LVDSB_DATAN2 LVDSA_DATAP0 LVDSB_DATAP2 DDC DATA DDC CLOCK LVDSA_DATAN1 LVDSA_DATAN3 LVDSB_DATAN3 LVDSA_DATAP1 LVDSB_DATAN0 LVDSA_DATAP3 LVDSB_DATAP3 LVDSB_DATAP0 LVDSA_DATAN2 LVDSA_CLKN LVDSB_CLKN LVDSA_DATAP2 LVDSB_DATAN1 LVDSA_CLKP LVDSB_CLKP LVDSB_DATAP1 Hardware Installation...
  • Page 20 GOT5840T-832 User’s Manual LVDS inverter connector: CN2 CN2 Pin Assignment Description Description Inverter ON-OFF +12V +12V Backlight control +12V TOUCH connector: CN3 CN3 Pin Assignment Description Sense Hardware Installation...
  • Page 21 GOT5840T-832 User’s Manual HDD power connector: CN4 CN9 Pin Assignment Pin Description +12V FRONT PANEL pin header: CN6 CN6 Pin Assignment Description Description + 5V Beep BUZZER Beep PWBTN RESET SATA LED +3.3V Hardware Installation...
  • Page 22 GOT5840T-832 User’s Manual SIM card connector: CN7 CN7 Pin Assignment Pin Description Description UIM PWR UIM RST UIM VPP UIM CLK UIM DATA Power connector: CN9 CN9 Pin Assignment Pin Description DCIN (9V -36V) DCIN (9V -36V) Hardware Installation...
  • Page 23 GOT5840T-832 User’s Manual Digital I/O pin header: CN10 CN10 Pin Assignment Pin Description Description GPIO0 GPIO1 GPIO2 GPIO3 GPIO4 GPIO5 GPIO6 GPIO7 GPIO8 GPIO9 GPIO10 GPIO11 GPIO12 GPIO13 GPIO14 GPIO15 Speaker Out & MIC IN connector: CN11 CN11 Pin Assignment Description Description SPKOUT_L-...
  • Page 24 GOT5840T-832 User’s Manual VGA Cable Connector: CN12 CN12 Pin Assignment Signal Signal Green N.C. Blue N.C. DDC DATA N.C. GND . Horizontal Sync Vertical Sync DCC CLK N.C. USB CONNECTOR (reserved): CN14/CN20 CN14/CN20 Pin Assignment Description Hardware Installation...
  • Page 25 GOT5840T-832 User’s Manual Audio Lin In connector: CN15 CN15 Pin Assignment Description LINE IN L LIN IN R Power lamp connector: CN16 CN16 Pin Assignment Description Description Power (+5V) Power button connector: CN17 CN17 Pin Assignment Description Description Power Button Hardware Installation...
  • Page 26 GOT5840T-832 User’s Manual Touch function enable/disable & LED indicator connector: CN18 CN18 Pin Assignment Description ON/OFF button Panel control Keypad connector: CN19 CN19 Pin Assignment Description Panel ON/OFF Normal LED Power LED Blacklight down Blacklight up Hardware Installation...
  • Page 27 GOT5840T-832 User’s Manual USB box header: USB1 USB1 Pin Assignment Description Description USB- USB- USB+ USB+ Serial Port box header: COM3, COM4 COM3, COM4 Pin Assignment Description Description Hardware Installation...

  • Page 28: Ethernet

    RI, Ring Indicator Ethernet The GOT5840T-834 is equipped with two high performance Plug and Play Ethernet interfaces, full compliant with IEEE 802.3 standard, and can be connected with a RJ-45 LAN connector. Please refer to detailed pin assignment list below:...

  • Page 29: Mountings - Panel/Wall/Desktop/Vesa

    There are several mounting ways for the GOT5840T-834, Panel, Wall, Desktop and VESA mountings. 2.4.1 Panel Mounting The GOT5840T-834 is designed for panel mount application. A set of standard mounting kit are bundled with the system package that you can use it to mount the GOT5840T-834. Hardware Installation...

  • Page 30: Wall-Mounting

    GOT5840T-832 User’s Manual 2.4.2 Wall-Mounting The GOT5840T-834 is designed for Wall mounting application. Please refer to the following steps: Find out the screws as marked on the back side of chassis. 2.4.3 Desktop-Mounting The GOT5840T-834 is designed for desktop mounting application. Please refer to the...

  • Page 31: Vesa-Arm Mounting

    GOT5840T-832 User’s Manual Step 2 Assemble the desktop stand to the chassis, and fix the screws. 2.4.4 VESA-ARM Mounting Step 1 Find out the screws as marked on the back side of chassis. Step 2 Assemble the VESA-ARM to the back side of the chassis, and fix the screws. Hardware Installation...
  • Page 32 GOT5840T-832 User’s Manual Step 3 VESA mounting Installation completed. Caution：Use recommended/suitable mounting apparatus to avoid risk of injury. Hardware Installation...

  • Page 33: Dram Installation

    GOT5840T-832 User’s Manual DRAM Installation The GOT5840T-834 provides one 204-pin DDR3L SO-DIMM socket that support system memory up to 8GB. Please follow steps below to install the memory modules: Step 1 Unscrew six screws to remove the rear chassis. Step 2 Open the back cover and find mainboard (SBC87834).
  • Page 34 GOT5840T-832 User’s Manual Step 3 Push down latches on each side of the DIMM socket. Step 4 Install the memory module into the socket and push it firmly down until it is fully seated. The socket latches are levered upwards and clipped on to the edges of the DIMM.

  • Page 35: Mini Cards Card Installation

    GOT5840T-832 User’s Manual Mini cards Card Installation 2.6.1 Wireless LAN Card Installation The GOT5840-834 provides two Mini card slots for user to install wireless LAN cards. You can choose either slot 1 or slot 2 to install the wireless LAN card and refer to the following instructions and illustration: Step 1 Open the back cover and find out the mini-card slot on main board.
  • Page 36 GOT5840T-832 User’s Manual Step 3 Find the built-in Antenna cable. Step 4 There are two connectors on wireless LAN card. One is MAIN, and the other is auxiliary. Connect antenna cable to MAIN connector on wireless LAN card. Hardware Installation...

  • Page 37: Msata Card Installation

    GOT5840T-832 User’s Manual 2.6.2 mSATA Card Installation The GOT5153W-834 provides one Mini card slot for user to install mSATA. Please choose the slot 2 when installing the mSATA card and refer to the following instructions and illustration: Step 1 Open the back cover and find out the mini-card slot on main board. Step 2 Insert the mSATA card to the slot 2.

  • Page 38: Power Input (Phoenix Type)

    GOT5840T-832 User’s Manual Power Input (Phoenix type) GOT5840T-834 equips with a phoenix type power connector. It adopts 9VDC to 36VDC. Please follow the signs on power connector to connect DC power source. G: Safety ground －:Power negative +: Power positive NOTE: The safety ground must be connected to ensure the unit working appropriately.

  • Page 39: Chapter 3 Ami Bios Setup Utility

    GOT5840T-832 User’s Manual CHAPTER 3 AMI BIOS SETUP UTILITY This chapter provides users with detailed description how to set up basic system configuration through the AMIBIOS8 BIOS setup utility. Navigation Keys The BIOS setup/utility uses a key-based navigation system called hot keys. Most of the BIOS setup utility hot keys can be used at any time during the setup navigation process.

  • Page 40: Main Menu

    GOT5840T-832 User’s Manual Main Menu  System Time/Date Use this option to change the system time and date. Highlight System Time or System Date using the <Arrow> keys. Enter new values through the keyboard. Press the <Tab> key or the <Arrow>...

  • Page 41: Advanced Menu

    GOT5840T-832 User’s Manual Advanced Menu The Advanced menu allows users to set configuration of the CPU and other system devices. You can select any of the items in the left frame of the screen to go to the sub menus: ...
  • Page 42 GOT5840T-832 User’s Manual  ACPI Sleep State Allow you to select the Advanced Configuration and Power Interface (ACPI) state to be used for system suspend. Here are the options for your selection, Suspend disable and S3 (Suspend to RAM). AMI BIOS Setup Utility...
  • Page 43 GOT5840T-832 User’s Manual  NCT6106D Super IO Configuration Use this screen to select options for the Super IO Configuration, and change the value of the selected option Serial Port 1-4 configuration Serial port: This option used to enable or disable the serial port. Device Setting: This item specifies the base I/O port address and Interrupt Request address of serial port.
  • Page 44 GOT5840T-832 User’s Manual  Serial Type This option used to select RS232/422/485 function. AMI BIOS Setup Utility...
  • Page 45 GOT5840T-832 User’s Manual  NCT6106D H/W Monitor This screen shows the Hardware Health Configuration. AMI BIOS Setup Utility...
  • Page 46 GOT5840T-832 User’s Manual  CPU Configuration This screen shows the CPU Configuration and Intel virtualization technology enable/disable selected AMI BIOS Setup Utility...
  • Page 47 GOT5840T-832 User’s Manual  IDE Configuration You can use this screen to select options for the SATA Configuration, and change the value of the selected option.  SATA Mode Use this item to choose the SATA operation mode. Here are the options for your selection, IDE Mode, AHCI Mode.
  • Page 48 GOT5840T-832 User’s Manual  USB Configuration You can use this screen to select options for the USB Configuration, If USB3.0 function used, XHCI Mode must enable and EHCI must disable. **XHCI default is Auto. AMI BIOS Setup Utility...
  • Page 49 GOT5840T-832 User’s Manual  LPSS & SCC Configuration You can select any of the items in the frame of the screen to change the OS, the default setting is Win 7. Please be informed to select the Windows 8.x when installing Win 8 or Win 8.1. If using the Android OS, please refer to https://01.org/android-ia.
  • Page 50 GOT5840T-832 User’s Manual  Security Configuration The Advanced menu allows users to update the TXE firmware. AMI BIOS Setup Utility...

  • Page 51: Chipset Menu

    GOT5840T-832 User’s Manual Chipset Menu The Chipset menu allows users to change the advanced chipset settings. AMI BIOS Setup Utility...
  • Page 52 GOT5840T-832 User’s Manual  North Bridge This screen shows the North Bridge memory information.  South Bridge AMI BIOS Setup Utility...

  • Page 53: Security

    GOT5840T-832 User’s Manual Security AMI BIOS Setup Utility...

  • Page 54: Boot Menu

    GOT5840T-832 User’s Manual Boot Menu The Boot menu allows users to change boot options of the system. You can select any of the items in the left frame of the screen to go to the sub menus: Setup Prompt Timeout Set the Timeout for wait press key to enter Setup Menu.

  • Page 55: Save & Exit

    GOT5840T-832 User’s Manual Save & Exit This page is intentionally left blank. AMI BIOS Setup Utility...

  • Page 56: Chapter 4 Drivers Installation

    GOT5840T-832 User’s Manual CHAPTER 4 DRIVERS INSTALLATION System GOT5840T-834 supports Windows 7, Windows 8.1 ,WES 7 and WE8S. To facilitate the installation of system driver, please carefully read the instructions in this chapter before start installing. 4.1.1 Win 7 Insert Driver CD and select the “\Drivers”.

  • Page 57: Win 8.1

    4.1.2 Win 8.1 Insert Driver CD and select the “\Drivers”. Select all files and follow the installing procedure. Touch Screen The GOT5840T-834 uses the 5-wire analog resistive. There are the specification and driver installation which are listed below. 4.2.1 Specification Touch Screen...

  • Page 58: Driver Installation- Windows 7/8.1

    GOT5840T-832 User’s Manual 4.2.2 Driver Installation- Windows 7/8.1 The GOT5840T-834 provides a touch screen driver that users can install it under the operating system Windows 7/8.1. To facilitate installation of the touch screen driver, you should read the instructions in this chapter carefully before you attempt installation.
  • Page 59 GOT5840T-832 User’s Manual Select the “Standard Calibrate” tab. Calibration: To adjust the display with touch panel, click “Calibration” and follow the calibrate point to do calibration; there are five points on screen for calibration. Press OK. Drivers Installation...

  • Page 60: Embedded O.s

    GOT5840T-832 User’s Manual Embedded O.S. The GOT5840T-834 provides the WES 7 and WE8S Embedded. The O.S. is supported devices which are listed below. 4.3.1 WES 7 & WE8S Here are supported onboard devices: Onboard Multi I/O  SATA HDD ...
  • Page 61 GOT5840T-832 User’s Manual This page is intentionally left blank. Drivers Installation...

  • Page 62: Appendix Awatchdog Timer

    GOT5840T-832 User’s Manual APPENDIX A WATCHDOG TIMER About Watchdog Timer Software stability is major issue in most application. Some embedded systems are not watched by human for 24 hours. It is usually too slow to wait for someone to reboot when computer hangs.

  • Page 63: Wdt Sample Program

    GOT5840T-832 User’s Manual WDT Sample Program Enable WDT 1.Enable configuration -O 2E 87 -O 2E 87 2. Select Logic device: -O 2E 07 -O 2F 08 3. WDT Device Enable -O 2E 30 -O 2F 01 4. Set timer unit -O 2E F0 -O 2F 00 ...
  • Page 64 GOT5840T-832 User’s Manual Watchdog Timer...
  • Page 65 GOT5840T-832 User’s Manual Watchdog Timer...

  • Page 66: Appendix Bbacklight Control

    BACKLIGHT CONTROL About Backlight Control Axiomtek offers the backlight control tool under Windows 7 and Windows 8, people can adjust the panel backlight depending on your personal taste and the amount of ambient light in the room after installing the backlight control tool.
  • Page 67 GOT5840T-832 User’s Manual Backlight Control...
  • Page 68 GOT5840T-832 User’s Manual Follow the installing procedures and press “Close”. Step 2 Backlight Control...
  • Page 69 GOT5840T-832 User’s Manual Backlight Control...
  • Page 70 GOT5840T-832 User’s Manual Backlight Control...
  • Page 71 GOT5840T-832 User’s Manual Backlight Control...
  • Page 72 GOT5840T-832 User’s Manual Backlight Control...
  • Page 73 GOT5840T-832 User’s Manual Backlight Control...
  • Page 74 GOT5840T-832 User’s Manual Step 3 System auto reboot, installation completed. Select “△” icon then find out the “Axiomtek” to ensure the brightness driver Step 4 is installed appropriately. Step 5 How to use the brightness Control There are two ways to adjust the display brightness.
  • Page 75 GOT5840T-832 User’s Manual Step 5.2. Click the “Control Panel” then select “Power Options” to adjust the display brightness. Backlight Control...

  • Page 76: Removed Brightness Control Tool

    GOT5840T-832 User’s Manual Removed Brightness Control Tool Step 1 According to the OS version, please insert the driver CD and follow the path to select the proper driver, “\Driver\Win8.x\Step 8 – Setup” or \Driver\Win7\Step 8 - Setup”. Backlight Control...
  • Page 77 GOT5840T-832 User’s Manual Follow the procedures and press “Close”. Step 2 Backlight Control...
  • Page 78 GOT5840T-832 User’s Manual Backlight Control...
  • Page 79 GOT5840T-832 User’s Manual Step 3 System auto reboot, uninstallation completed. Backlight Control...

Table of Contents