Synchronize The Time Code Of The External Device With That Of The Camera (Tc Out) - Panasonic LUMIX DC-GH6 Owner's Manual

Video Settings – Synchronizing the Time Code with an External Device
Synchronize the Time Code of the External Device
with That of the Camera (TC OUT)
The initial time code value of the external device is synchronized according
to the time code signal (LTC signal) of the camera.
1
Prepare for time code synchronizing. (
for Time Code Synchronization:
2
Select [TC Output Reference].
≥
Output Reference]
[REC]
Outputs the time code signal for the images that you record.
[HDMI]
When connected with an external device (external recorder, etc.) via HDMI, the
time code signal output is delayed slightly to match the HDMI images.
3
Set [TC Synchronization] to [TC OUT].
≥
Synchronization]
≥The time code signal is output according to the recording frame
rate of the [Rec Quality] and the [Time Code Mode] ([DF]/[NDF])
setting.
4
Operate the external device to synchronize the time
code.
[ ] [ ]
[ ] [ ]
[TC OUT]
391)
[Time Code]
[Time Code]
393
Preparations
[External TC Setting]
[External TC Setting]
[TC
[TC