Operating The Timer(S); Fc510 Timer - Rinnai FC824 Installation And Operation Manual

Operating the Timer(s) (FC510):
The Timer feature allows you to delay the start time
of the heater for up to 24 hours.
Operating the On Timer
Press the On Timer button . The On Time indicator will
illuminate and the Combustion indicator will be illumi-
nated green to confirm that the heater is awaiting for
the Delay "ON" time period to pass before commenc-
ing operation. The Delay On Timer indicator will also
illuminate and the current Delay On Time period will
be displayed on the Digital (Temp / Time) display for
10 seconds. While displayed, the Delay "ON" time can
be adjusted by pressing the Up or Down buttons . A
delay time of up to 9½ hours can be set in increments
of 30 minutes and a delay time of up to 24 hours in
increments of 60 minutes. When the programmed
Delay "ON" time period has passed, the heater will
automatically begin operation.
The heater will continue to operate for a period of 60
minutes. On Timer operation can be cancelled by
pressing either the ON/OFF button or the Off Timer
button . The delay 'On' time last programmed is
stored in the memory and will be the default until it is
re-adjusted.
If the On Timer button is pressed while the heater is
in operation the On Timer will override manual
operation.
NOTE
Fan Convector Manual
Operating the Off Timer
The Off Timer allows you to set a 60 minute delay
before the heater will automatically turn off.
To operate, press the Off Timer button . The Off
Timer indicator will illuminate and the Combustion
indicator will be illuminated red to confirm that the
heater will continue operation until the Delay 'off'
time period has passed after which it will stop. The
Delay Off time is 60 minutes. When this time has
passed, the heater will automatically stop operation
and the Off Timer indicator will go out.
During Off Timer operation full manual control of the
heater is available.
After the Off Timer operation is completed, press the
On/Off button twice to restart the heater.
The Off Timer and On Timer(s) work independently of
each other. However, if both timers are operating
and the Delay On time period is 30 minutes, the Delay
Off Timer will override the Delay On Timer.
NOTE
17