Table of Contents
Advertisement
b. When connected as shown in Fig. 3, a reverse check
on the diode is made. If the diode under test is
good, " OL " will be displayed. If the diode under
test is defective, " .000 " or other numbers will be
displayed. Proper diode testing should include both
steps a. and b. above.
5-7 Capacitance Measurement
1)Connect BLACK test lead into " COM " terminal ( 3-9,
Fig. 1 ).
2)Connect RED test lead into " Ω " terminal ( 3-8, Fig. 1 ).
3)Select the " Function rotary switch " ( 3-7, Fig. 1 ) to
the "
" position.
4)Power On the meter by pressing the " Power On button "
( 3-2, Fig. 1 ) once, the Display will show " SMART ", the
meter is under " Smart " mode for capacitance measurement.
5)The meter can measure the capacitance value automatically
and with auto range selection.
Fig. 3
12
Advertisement
Table of Contents
