Table of Contents
Advertisement
5-3 Symbols & units of display
Symbols
Units
SMART
Appears when selecting " Smart " mode.
The meter default mode is " Smart "
AUTO
Appears when selecting " Automatic range " mode.
MANU
Appears when selecting " Manual range " mode.
Appears when selecting DC mode.
( DC voltage or DC current )
Appears when selecting AC mode.
( AC voltage or AC current )
* Appears when the " Data hold " function is
operated.
* " Data hold " function is executed on the
Power voltage is already under the low condition.
Appears when the " Continuity beeper " is
operated.
V
Units for voltage measurements.
mA,A
Units for " Current " measurement.
Ω ,KΩ ,MΩ
Units for resistance measurements.
nF,uF
Units for " Capacitance " measurement.
KHz
Units for " Frequency " measurement.
Appears when the " Diode " function is operated.
Appears when measuring a DCV or DCA value
－
is negative.
OL
Over range indicator for voltage and current,
ohm function.
Descriptions
Automatic range " or " Manual mode " mode.
9
Advertisement
Table of Contents
