Advertisement
Installation
3
Connect the DB9 port on the computer to the DB9 port on the adapter
cable.
4
(Optional) Connect a local monitor to the Local Video port on the Local
Unit using a VGA cable.
5
Connect the external power supply to the power jack on the Local Unit
and plug it into an appropriate power source.
6
Connect the RJ45 Link ports of the Local and Remote Units using
Cat5/5e/6 cable.
7
Connect the HD15 port on the Remote Unit to a monitor.
8
Connect the included 3.5 mm Male to DB9 Male adapter cable to the
Serial port on the Remote Unit.
9
Connect the DB9 Male port on the adapter cable to the DB9 port of the
serial device you are connecting (touch-screen monitor, barcode scanner, etc.)
10
Connect the external power supply to the power jack on the Remote
Unit and plug it into an appropriate power source.
11
Turn the display(s) on first.
12
Turn on the computer.
13
If the video on your monitor is either too dark or too light, use the Gain
adjustment on the Remote Unit.
14
If the video on your monitor is fuzzy, or shows a ghosting effect, use the
EQ adjustment on the Remote Unit.
Safety Information
• To reduce the risk of electric shock, do not expose this product to moisture.
• Operate this product using only the included external power supply. Use
of other power supplies could impair performance, damage the product,
or cause fire.
• Use only recommended accessories to avoid fire, shock or other hazards.
• Unplug this product before cleaning. Use a damp cloth for cleaning. Do
not use cleaning fluids or aerosols, which could enter the unit and cause
damage, fire or electrical shock.
• Do not attempt to service this unit. Instead, disconnect it and contact your
Authorized Reseller or technician.
continued
5
Advertisement
