Displayport / mini displayport multi-stream transport hubs (12 pages)
Summary of Contents for Tripp Lite B119-003-UHD
Page 1
Model: B119-003-UHD Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com/support Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com/support Русскоязычная версия настоящего руководства представлена на веб-сайте компании Tripp Lite по адресу: www.tripplite.com/support PROTECT YOUR INVESTMENT! Register your product for quicker service and ultimate peace of mind.
Product Features • Switch between three HDMI source devices (Blu-ray™ player, cable box, PC, etc.) connected to a single display • Switch devices via push button, RS-232 port control or the included remote control • Supports Ultra High Definition (UHD) video resolutions up to 4096 x 2160 (4K x 2K) @ 60 Hz •...
Page 4
Note: The length of the HDMI cable connecting the switch to the display must not exceed 16 ft. (5 m). Connect the external power supply to the switch. Plug it into a Tripp Lite surge protector, uninterruptible power supply (UPS) or power distribution unit (PDU).
Page 5
Standard Installation Turn on the power to the HDMI source devices and display. The blue LEDs on the unit will illuminate to indicate the signal is being received. Switch between source devices using the Select push button on the unit, RS-232 serial control or the included remote control. See the RS-232 Serial Control section in this manual for details on controlling the switch using Terminal Emulation Software.
Page 6
Standard Installation Select the COM port that is being used, and update the remaining settings as follows: Baud Rate (9600) Data (8 bit) Parity (none) Stop (1 bit) Flow Control (Xon/Xoff) 01-070-933768-EN.indd 6 2/6/2018 3:53:04 P...
Page 7
Standard Installation Next, you will need to configure your software to allow input control. Go to the Setup dropdown menu, and select the Terminal option. 01-070-933768-EN.indd 7 2/6/2018 3:53:04 P...
Page 8
Standard Installation Update the following settings: Receive (AUTO) Local Echo (enable) The remaining settings can stay as they are. Once these settings are updated, the Terminal Emulation Software will recognize the switch, allowing you to enter commands to control it. The following table lists the available commands.
2. Was the power to the connected devices turned off prior to installation? If not, restart them. 3. What resolution are you trying to reach? The B119-003-UHD is tested to support Ultra High Definition (UHD) video resolutions up to 4096 x 2160 @ 60 Hz and 36-bit Deep Color (12 bits per channel).
Specifications Connectors Input (3x) HDMI (Female) Output HDMI (Female), DB9 (Female) Video Maximum Resolution 4096 x 2160 @ 60 Hz Color Depth 36-bit Deep Color (12 bits per channel) Video Amplifier Bandwidth 10.2 Gbps / 300 MHz Environmental Operating Temperature 32°...
Warranty and Product Registration 1-Year Limited Warranty Tripp Lite warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. Tripp Lite’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products.
Page 12
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support 18-01-070 93-3768_RevB 01-070-933768-EN.indd 12 2/6/2018 3:53:05 P...