Troubleshooting - Triax Digital Satellite Receiver SR 110 User Manual

Troubleshooting

Symptom?
Can't find satellite, or no
signal.
Front display dark, no clock
time visible.
Clock time visible.
No sound or picture, but menu
displays of the receiver
present.
Channel place visible, TV set
showing no image.
Poor picture, blocking fault,
formation of small blocks, no
sound.
Cause?
Example: ASTRA19° East
Key (pre-programming: "Das
1
Erste").
key("Das Erste",
INFO
FR11837).
Both signal and quality are 0 %.
Power cable not connected.
Receiver in standby mode.
The aerial is not aligned with the
satellite.
No signal (with symbol).
The system is not connected
correctly.
The TV set is not in AV mode.
The aerial is not aligned
precisely with the satellite.
Remedy
Align vertical mirror to the
south. Turn a few millimetres
to the left, wait about 3
seconds, then repeat until both
signal and quality are shown.
With a signal of about 60%, the
black background will
disappear, and a TV image will
appear.
For a different satellite, please
select a current channel from
the pre-programmed channel
list, then press the
INFO
Connect the power cable to the
mains socket.
Switch on main switch.
Short circuit at the aerial supply
possible: Check connections.
Press the power key on the
remote control unit (or on the
receiver). The receiver will
switch on and the channel will
be shown on the TV screen.
Align your aerial correctly.
Check the cable connection
from LNB to receiver and from
receiver to the connected units.
Align your aerial.
Check the connection of the
SCART cable.
Switch the TV set to the
appropriate AV input.
Align your aerial more
precisely. To do this, use the
key on the remote control
INFO
unit. Signal indication for the
aerial alignment will be shown.
key.
33