Programmed Data Verification Reports - TEC SL-9000 Owner's Manual

12. PROGRAMMED DATA VERIFICATION REPORTS

12. PROGRAMMED DATA VERIFICATION REPORTS
The programmed data can be printed on journal paper. Before issuing these reports, load the journal
paper. The programmed data verification reports cannot be issued with any label. The keys to be
used in the following procedures are those on the numeric key pad, which is framed in black in the
figure on page 5-3, but not on the programming keyboard.
■
How to access REPORT menu
Press the key to access th following display. Enter "5", and the scale will enter the REPORT
ESC.
menu. If the REPORT menu is protected, enter "5" and a password. (Refer to section 13)
<Menu> MAIN
0. PROG.
1. REG
2. MARK DOWN
3. REWRAP
4. SECURITY
Set the table menu #.
PLU programmed data
Commodity description
Speed key programmed data
Commodity and ingredient
description
Grade lines
Vendor name
Idiom
5. READ
6. RESET
7.
8.
9.
Menu : REPORT
◇
5 0
5 1
5 2
5 3
5 4
5 5
5 6
v
PRT
*
12- 1
12. PROGRAMMED DATA VERIFICATION REPORTS
Press:
u
(See the next page)
u
u