Removal And Replacement Of Media - TEC SL-9000 Owner's Manual

9.

REMOVAL AND REPLACEMENT OF MEDIA

9. REMOVAL AND REPLACEMENT OF MEDIA
1. Open the printer cover and turn the head-up lever to the right.
2. Pull out the roll stopper and backing paper stopper, then remove the receipt/label core with the
backing paper. You can loosen the backing paper by turing the paper winding shaft anti-clockwise.
Head-up Lever
3. Put a new receipt/label roll over the media shaft and fix it with the roll stopper.
9. REMOVAL AND REPLACEMENT OF MEDIA
Paper Winding Shaft
9- 1
Receipt/Label Core
Roll Stopper
Backing Paper Stopper
Backing Paper (Labels only)
Media Shaft
Receipt/Label
Roll Stopper