Free Format Setting - TEC SL-9000 Owner's Manual

11. PROGRAMMING PROCEDURES

11.21 FREE FORMAT SETTING

Menu Page: 3
Item No.: 1
When using 57-mm
characters can be rotated and magnified, and print items are selectable.
Enter the coordinate of each print item's lower left corner using the lower left corner of a label as the
origin. When a print item is located beyond the label width, an error will occur.
Key functions
①
↓
②
ENTER
③ ↑
④
→
⑤
←
⑥
◇
<MENU>
Page 3
wide labels, up to three print formats can be changed freely.
: Moves downward (Data is stored.)
: Moves downward (Data is stored.)
: Moves upward (Data is stored.)
: Moves to the right
: Moves to the left
: Selects a setting
a. ROT (Rotation) : 0°
b. MAG (Magnification) :
c. PRT (Print) : ON
t
1
1
Select data format
Select a print item
to be re-located.
90° 180°
0: normal
1: × 2 (width)
2: × 2 (height)
3: × 4 (width: x 2, height: x 2)
OFF
or
ENTER
Change the
coordinate.
(See NOTE 4.)
Tset print
11-32
11.21 FREE FORMAT SETTING
270°
PROG.
TEST
ESC.
t
Moreover,
<MENU>
Page 3
Main
<MENU>