TEC SL-9000 Owner's Manual page 86

14. OPERATING PROCEDURES
(2) Restraints in case of clerks' name printing on labels
■
Price deletion
Prices already registered can be deleted in the following procedure.
Enter the deletion mode.
NEXT PLU: the next item
VOID: the previous item
Delete a registered price.
Exit the deletion mode.
■
Subtotal
The following procedure will sum up all of the registered items.
1) "GRADE LINE" can not be selected and printed.
2) Commodity name can not be printed on the 4th line of 57 mm eidth label and 2nd line of 48
mm width label, because 1 line of commodity is used for clerk's name printing.
3) The printing position of clerk name will be selected by the initial setting for GRADE LINE
position.
Initial 3-6 (G. Line Print Position)
0: Right side on bottom line of commodity name
1: Left side on bottom line of commodity name
If you would like to switch the initial setting # please contact your authorized TOSHIBA TEC
representative.
Enter vendor #.
Enter vendor #.
Press:
Press:
A receipt will be issued.
VOID
NEXT
or
VOID
PLU
PRT
*
C
ST
Enter prices.
PRT
*
14-21
Press:
C
(Cancel)
14.13 FLOATING VENDOR