Print Count Operation - TEC SL-9000 Owner's Manual

14. OPERATING PROCEDURES

14.4 PRINT COUNT OPERATION

With this procedure, a specified number of the same labels can be issued.
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH, FIX or BY-COUNT
Example A) When operating in Weigh mode.
Set the number of labels.
(Max. 99 labels)
Press :
Enter the PLU #.
Press :
PLU data is saved.
Place a commodity
on the platter.
(Ex. 0.700 lb.)
MANUAL :
Batch
The label is issued with the
backing paper attached.
NOTES: 1. A batch issue means to print labels continuously with the backing paper attached.
On-demand issue means to print label one by one.
2. To check the remaining number, clear the PLU and press the
PRESET
Press :
COUNT
5 0
PRT
*
3 0 9
PLU
SAVE
PRT
: AUTO
*
When all the specified numbers
of the labels are being issued.
©
14- 6
1
Clear the preset count.
On-demand
The label is issued.
14.4 PRINT COUNT OPERATION
©
Remove the commodity.
C
PRT
Press :
*
PRESET COUNT
key.