Programmed Data Verification Reports - TEC EM1-31064 Owner's Manual

12. PROGRAMMED DATA VERIFICATION REPORTS

12. PROGRAMMED DATA VERIFICATION REPORTS
The programmed data can be printed on journal paper. Before issuing these reports, load the journal paper.
The programmed data verification reports cannot be issued with any label. The keys to be used in the
following procedures are those on the numeric key pad, which is framed in black in the figure on page 5-
3, but not on the programming keyboard.
How to access the REPORTmenu
Press the ESC. key to access the following display. Enter "5", and the scale will enter the REPORT menu.
If the READ menu is protected, enter "5" and a password. (Refer to section 13)
<Menu>
0. PROG.
1. REG
2. MARK DOWN
3. REWRAP
4. SECURITY
Set the table menu #.
PLU programmed data
Commodity description
Speed key programmed data
Commodity and ingredient
description
Grade line
Vendor name
Idiom
5. REPORT
6. RESET
7.
8.
9.
Menu: REPORT
Press:
5
5
5
5
5
5
5
v
PRT
*
12. PROGRAMMED DATA VERIFICATION REPORTS
u
0
(See the next page)
u
1
2
u
3
4
5
6
12-1
EM1-31064