Plu Verifying Label - TEC SL-9000 Owner's Manual

11. PROGRAMMING PROCEDURES
11.5

PLU VERIFYING LABEL

Menu Page: 1
Item No.: 4
Verifies PLU data stored in the scale.
<MENU>
Page 1
CLEAR
To interrupt
label issue.
NOTES:
1. Labels are printed in both batch mode and on-demand mode.
2. When no PLU is stored in the selected range, an error occurs when the
pressed.
3. Pressing the
initial status of this menu.
4. After clearing a paper jam error, the scale will wait for an entry of PLU# again.
g
4
1 0
Set the individual PLU#. (Ex. PLU #100)
◇
1
Set the block PLU#. (Ex. PLU #100∼199)
1 0
Set the zone PLU#. (Ex. PLU #100∼108)
ENTER
To resume label issue
which has been interrupted.
CLEAR
key releases the scale from the error mode and returns to the
Set the entire PLU#.
0
◇
NEXT
0 1
PLU
<MENU>
PROG.
Page 1
ESC.
<MENU>
g
11-12
11.5 PLU VERIFYING LABEL
ENTER
The
confirmation
label is issued.
0 8
Main
ENTER
key is