TEC SL-9000 Owner's Manual page 62

12. PROGRAMMED DATA VERIFICATION REPORTS
Table 7
Menu #
50 PLU programmed data report
51 Commodity description report
52 Speed key programmed data report
53 Commodity and ingredient description
report
54 Grade line report
55 Vendor name report
56 Idiom report
Set the data range of each programmed data verification report
●
u
Report Name
PRT
*
Set the entire PLU #.
1
Set the individual PLU #. (Ex. PLU #100)
3
Set the block PLU #. (Ex. PLU #30∼39)
1
Set the zone PLU #. (Ex. PLU #100∼108)
12. PROGRAMMED DATA VERIFICATION REPORTS
All the preset PLU data are listed in the PLU # order
(from small to large #).
All the preset commodity names are listed in the
PLU # order (from small to large #).
The PLU # and the commodity name preset on each
speed key is listed.
All the presets commodity names and ingredient
messages are listed in the PLU # order (from small
to large #).
All the preset grade line contents are listed.
All preset vendor names are listed.
All preset idioms are listed.
0 0
◇
0 0
FOR
12- 2
Contents
1 0 8
v