Print Count Operation - TEC SL-9000-ESB-X SERIES Owner's Manual

14. OPERATING PROCEDURES

14.4 PRINT COUNT OPERATION

With this procedure, a specified number of the same labels can be issued.
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH, FIX or BY-COUNT
When operating in Weigh mode.
Example A)
Set the number of labels.
(Max. 99 labels)
Press:
Enter the PLU #.
Press:
PLU data is saved.
Place a commodity on
the platter.
(Ex. 0.700 lb.)
MANUAL:
Batch
The labels are issued with
the backing paper attached.
NOTES: 1. A batch issue means to print labels continuously with the backing paper attached.
On-demand issue means to print label one by one.
2. To check the remaining number, press the PLU and the PRESET COUNT keys.
PRESET
Press:
COUNT
5 0
PRT
*
3 0 9
PLU
SAVE
PRT
:AUTO
*
When all the specified numbers
of the labels are being issued.
C
1
Clear the preset count.
On-demand
The label is issued.
14-6
14.4 PRINT COUNT OPERATION
C
Remove the commodity.
C
PRT
Press:
*