Removal And Replacement Of Label Roll - TEC EMl-31055 Operation Manual

EMl-31055
9. REMOVAL AND REPLACEMENT OF LABEL ROLL
(for On-demand printing mode)
1. Remove the printer cover and right side cover.
Then push the head-up lever in the direction
indicated by the allow.
2. Pull out the label cassette and remove the core'
of the label roll and the label backing paper.
NOTE: To remove the label backing paper,
loosen the paper by turning the paper
winding shaft counterclockwise and
remove the paper stopper.
roll on the label cassette.
the feed key to confirm that the label is
issued correctly.